Hi guys ..i need some help..
looking at the output bellow regarding the gigastack module is it normal to see
link1 is down, link2 is up
or is there something wrong ?
System image file is "flash:c3500xl-c3h2s-mz.120-5.WC8.bin"
cisco WS-C3524-XL (PowerPC403) processor (revision 0x01) with 8192K/1024K bytes
of memory.
switch# show inter gig0/2
GigabitEthernet0/2 is up, line protocol is up
Hardware is Gigabit Ethernet, address is 0008.a32e.489a (bia 0008.a32e.48
Description: Inter-Stack to KNW_1C_A02
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive not set
Auto-duplex (Full), 1000Mb/s, media type is CX_GIGASTACK
output flow-control is off, input flow-control is off
ARP type: ARPA, ARP Timeout 04:00:00
GigaStack module(0.2) in GBIC slot. link1 is down, link2 is up
Last input 00:00:24, output 00:00:00, output hang never
Last clearing of "show interface" counters never
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 1354000 bits/sec, 2169 packets/sec
5 minute output rate 306000 bits/sec, 493 packets/sec
171909117 packets input, 1291035938 bytes, 0 no buffer
Received 27674231 broadcasts, 0 runts, 0 giants, 0 throttles
1 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored
0 watchdog, 23733551 multicast, 0 pause input
833817498 packets output, 805721862 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 babbles, 0 late collision, 0 deferred
0 lost carrier, 0 no carrier, 0 pause output
0 output buffer failures, 0 output buffers swapped out
thanks for your help.....
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
