Hi,
Can anyone here clarify if the solution described in VOL2-LAB2-
Task3.4 Correct? I couldn't bring MPLS neighbor peerings up.
When i run the command "show mpls ldp discovery detail" it says
Local LDP Identifier:
10.10.10.6:0
Discovery Sources:
Interfaces:
Serial0/0 (ldp): xmit
Enabled: Interface config
Hello interval: 5000 ms; Transport IP addr: 10.10.10.6
Serial0/0.2456 (ldp): xmit/recv
Enabled: Interface config
Hello interval: 5000 ms; Transport IP addr: 10.10.10.6
LDP Id: 10.10.10.2:0; no route to transport addr
Src IP addr: 216.30.1.2; Transport IP addr: 10.10.10.2
Hold time: 15 sec; Proposed local/peer: 15/15 sec
There is no transport address reachability, (10.10.10.6) thus the
neighbors are not up, but the Solution guide seems to show the
neighbors up....
Am i missing something here? Please can anyone help to clarify.
Thanks
Yis
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
