Sorry not 10.10.10.6 rather 10.10.10.2.... Sorry, I'm doing other labs now as well..
On Sat, Aug 11, 2012 at 1:40 AM, varan <[email protected]> wrote: > Hi, > > Can anyone here clarify if the solution described in VOL2-LAB2- > Task3.4 Correct? I couldn't bring MPLS neighbor peerings up. > When i run the command "show mpls ldp discovery detail" it says > > Local LDP Identifier: > 10.10.10.6:0 > Discovery Sources: > Interfaces: > Serial0/0 (ldp): xmit > Enabled: Interface config > Hello interval: 5000 ms; Transport IP addr: 10.10.10.6 > Serial0/0.2456 (ldp): xmit/recv > Enabled: Interface config > Hello interval: 5000 ms; Transport IP addr: 10.10.10.6 > LDP Id: 10.10.10.2:0; no route to transport addr > Src IP addr: 216.30.1.2; Transport IP addr: 10.10.10.2 > Hold time: 15 sec; Proposed local/peer: 15/15 sec > > There is no transport address reachability, (10.10.10.6) thus the > neighbors are not up, but the Solution guide seems to show the > neighbors up.... > > Am i missing something here? Please can anyone help to clarify. > > Thanks > Yis > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
