Quick google and as I originally thought edge router only. Everyone else sparse mode On Oct 3, 2012 8:30 AM, "Bal Birdy" <[email protected]> wrote: > > Oops I was talking about edge router but I believe this should be true for all routers who have pim joined to receive the mcast traffic > > On Oct 3, 2012 8:28 AM, "Bal Birdy" <[email protected]> wrote: >> >> (*,g) with reference to the rp. Cisco defaults to (s,g) after learning source after first packet. This is spt switchover. You can adjust the number of packets/amount of data before switchover >> >> On Oct 3, 2012 3:17 AM, "Jaris Aizprua" <[email protected]> wrote: >>> >>> Hello everybody, >>> >>> I have the next doubt related to Multicast PIM-SM: >>> >>> * Once the source and destination have been discovered by the RP, the >>> shared tree must be merged, therefore: >>> >>> -> Which entry should be installed by the routers in the transit path >>> (between PIM-DR and RP) in their multicast routing table? (*,G) or (S,G) or >>> both? >>> >>> Thanks!!! >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com >>> >>> http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
