Dear Sami and Davis,
I did the same mistake , it was not configure and now its okay...... Thanks for quick reply . I am searching Internet from last 3-4 hours but hanged up then i sent this email to study group.. Thanks alot..................................again. With Regards Waheed Ahmed ________________________________ From: Samir Idris <[email protected]> To: waheed Ahmed <[email protected]> Cc: "[email protected]" <[email protected]> Sent: Monday, November 19, 2012 4:03 AM Subject: Re: [OSL | CCIE_RS] Interface Serial 0/0.3 multipoint or point-to-point Waheed, Have you configured encap frame-relay under the physical interface itself i.e. Serial 0/0? Regards, Samir Idris. On Mon, Nov 19, 2012 at 10:26 AM, waheed Ahmed <[email protected]> wrote: > > Dear Team, > > >I am using router 3640 and 3700 with the ios of c3640-jk9s-mz.124-16.bin and >c3745-a3jk9s-mz.123-4.T2.bin but when i am going to configure frame relay > >rtr(config)# interface serial 0/0.23 (Multipoint or point-to-point) options >are not showing. . > >Am stuck and need help further to get rid of.. > > >Thanks in advance.. > >Waheed. >_______________________________________________ >For more information regarding industry leading CCIE Lab training, please >visit www.ipexpert.com > >Are you a CCNP or CCIE and looking for a job? Check out >www.PlatinumPlacement.com > >http://onlinestudylist.com/mailman/listinfo/ccie_rs > -- Samir Idris _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
