No worries :) On Mon, Nov 19, 2012 at 11:14 AM, waheed Ahmed <[email protected]>wrote:
> > Dear Sami and Davis, > > I did the same mistake , it was not configure and now its okay...... > > Thanks for quick reply . I am searching Internet from last 3-4 hours but > hanged up then i sent this email to study group.. > > Thanks alot..................................again. > > > > > With Regards > Waheed Ahmed > > ------------------------------ > *From:* Samir Idris <[email protected]> > *To:* waheed Ahmed <[email protected]> > *Cc:* "[email protected]" <[email protected]> > *Sent:* Monday, November 19, 2012 4:03 AM > *Subject:* Re: [OSL | CCIE_RS] Interface Serial 0/0.3 multipoint or > point-to-point > > Waheed, > > Have you configured encap frame-relay under the physical interface itself > i.e. Serial 0/0? > > Regards, > Samir Idris. > > On Mon, Nov 19, 2012 at 10:26 AM, waheed Ahmed <[email protected]>wrote: > > > > Dear Team, > > > I am using router 3640 and 3700 with the ios of c3640-jk9s-mz.124-16.bin > and c3745-a3jk9s-mz.123-4.T2.bin but when i am going to configure frame > relay > > rtr(config)# interface serial 0/0.23 (Multipoint or point-to-point) > options are not showing. . > > Am stuck and need help further to get rid of.. > > > Thanks in advance.. > > Waheed. > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > > > > -- > Samir Idris > > > -- Samir Idris _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
