The diagram is correct and there's no error with R2. It has a dual-media port (SFP and RJ45). SFP is connected to Cat1's Gi0/2 and RJ-45 is connected to Cat1's Fa0/2. You can chose which one to use by using media-type interface-level command on R2, depending on the lab requirements.
Also - there are no other errors on that diagram :-) -- Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor - IPexpert On Fri, Nov 30, 2012 at 11:41 AM, Christian Schröder <[email protected]> wrote: > Hi, > > > I am searching for a current diagram of the IP expert CCIE RS topology. > > The version in the LAB workbooks (dated 2010) contains quite a few errors. > > The best I could find is: > http://proctorlabs.com/PDF/2010/Routing_and_Switching.pdf > > But even there is a problem: >> Catalyst Host Connection Table: >> Cat1 >> ==== >> Fa0/2 R2 Gi0/0 >> [...] >> Gi0/2 R2 Gi0/0 > > so Interface Gi0/2 of R2 is used twice. > I am unaware of any Ethernet Y-Cables :-D > > Could someone please point me to the most recent version of the topology > diagram? > Thanks in advance. > > > Cheers, > Christian > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
