Hi Use ONLY *:" l2tp-tunnel cdp"* for the QinQ tunnel. Let MST be negotiated on other trunks only.
Best Regards, Saleh Hassan Batouq [email protected] Tel: +968 99365607 Fax: +968 2469690 P.O.Box:1083- Postal Code:112 Muscat-Sultanate Of Oman On Thu, Jan 3, 2013 at 2:27 AM, C Led <[email protected]> wrote: > I have been working on my CCIE skill set for awhile now and I have run > into this issue in my lab. > > For most I would imagine that the CCIE lab envisioned > (IPEXPERT/360/etc...) has 4 switches. > > If I create a MST instance 0,1 and 2. Make SW1 and SW2 the root pri and > sec respectively. > > And then try to create the Q-in-Q tunnel on a single port between SW3 and > SW4... > > My MST config puts that port in blocked state. > > If I delete it from the MST config, then sometimes I can get the port up > and traffic going between 3 and 4. > > If the instruction set says "Create all even vlans in instance 1 and all > odd in instance 2" I can't remove it from > > the MST config. > > Looking for any ideas on this issue. > > > V/r > > Cyborgzhouse > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
