I'd deactivate the neighbors under the IPv4 address-Fam. It shouldn't matter for the CE since that neighbor wouldn't be reachable via the global VRF anyway, but it might be a good idea to remove it. You shouldn't need the other PE activated under ipv4 either unless you need to peer with that same neighbor for non-VPNv4 routes.
In fact, remove the CE from the base BGP config too. It only needs to be defined under the VRF address-family. Bob -- Sent from my iPhone, please excuse any typos. On Feb 1, 2013, at 7:52 PM, "Bodnar, Edward" <[email protected]> wrote: > Ya once I change things around and Use EIGRP or RIP or OSPF it all works. > So it must be something with BGP. > > > > From: marc abel [mailto:[email protected]] > Sent: Friday, February 01, 2013 7:07 PM > To: Bodnar, Edward > Cc: [email protected] > Subject: Re: [OSL | CCIE_RS] BGP PE - CE configuration > > > > Do you have "mpls ip" enabled on the correct interfaces? > > > > On Fri, Feb 1, 2013 at 4:24 PM, Bodnar, Edward > <[email protected]<mailto:[email protected]>> wrote: > > I can never seem to get this to work. I can See routes end to end but I am > missing something when I use BGP as the PE - CE protocol. I thought BGP was > supposed to be the easy one J > > > > > > I have full connectivity. And I can see routes Just can't ping. > > > > RT4: > > router bgp 1 > > no bgp default ipv4-unicast > > bgp log-neighbor-changes > > neighbor 1.1.1.1 remote-as 1 > > neighbor 1.1.1.1 update-source Loopback0 > > neighbor 10.10.45.5 remote-as 5 > > ! > > address-family ipv4 > > neighbor 1.1.1.1 activate > > neighbor 10.10.45.5 activate > > no auto-summary > > no synchronization > > exit-address-family > > ! > > address-family vpnv4 > > neighbor 1.1.1.1 activate > > neighbor 1.1.1.1 send-community both > > exit-address-family > > ! > > address-family ipv4 vrf B > > neighbor 10.10.45.5 remote-as 5 > > neighbor 10.10.45.5 activate > > no synchronization > > exit-address-family > > > > > > > > > > > > R5(config-router)#do sh run | s bgp > > router bgp 5 > > no synchronization > > bgp log-neighbor-changes > > network 55.55.55.55 mask 255.255.255.255 > > neighbor 10.10.45.4 remote-as 1 > > no auto-summary > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com<http://www.ipexpert.com> > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com<http://www.PlatinumPlacement.com> > > http://onlinestudylist.com/mailman/listinfo/ccie_rs > > > > > > > > -- > Marc Abel > > CCIE #35470 > > (Routing and Switching) > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
