I would go ahead and configure it as /64 in that case. -- Marko Milivojevic - CCIE #18427 (SP R&S) Senior CCIE Instructor / Managing Partner - IPexpert
On Mon, Feb 11, 2013 at 8:47 AM, Mills, Derek <[email protected]> wrote: > I need help understanding what the right thing to do for a specific task is. > I would love to hear from Marko on this... > > Let's say mock lab task states to configure R8 as static RP for the multicast > group FF70:cc1e::88. > > However, when you try to use an IPv6 ACL that specifically permits that host > and then configure the ipv6 pim rp-address <rp-address> <ipv6 acl> command > you get an error that prefix length must be less than /128. > > What is the right way to proceed? Can you interpret that task to mean RP > doesn't necessarily have to limit to only that multicast group? Should you > try to find the next smallest prefix-length that will work? No ACL at all? > > I think I got lab paranoia issue with this task but not sure. > > > > ---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > Anheuser-Busch InBev Email Disclaimer www.ab-inbev.com > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
