Ray, This seems like an IOS feature, one is NOT allowed to change the distance for a subset of external eigrp routes. Using 'distance EIGRP' command will work, but will modify the distance of all EIGRP external routes in RIB. Regards, Naren ________________________________ From: Ray Courtney <[email protected]> To: [email protected] Sent: Sunday, 7 April 2013 1:28 PM Subject: [OSL | CCIE_RS] Changing the distance of EIGRP routes
Hi Everyone, I have come across this problem (Vol 2 Lab 8): The requirement is to have certain routes showing up as AD 95. router eigrp 1 Distance 95 172.30.200.7 0.0.0.0 90 access-list 90 permit 10.7.1.0 access-list 90 permit 10.7.2.0 These were External routes at the time and this command did not work. The only way to change the AD was to change the AD for all External routes using: distance eigrp 90 95 Is this a "feature" of the IOS version. Ray Courtney _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com http://onlinestudylist.com/mailman/listinfo/ccie_rs
