Hi all,
I know that the sum of reserved bandwidth on CBWFQ cannot exceed 75 % of the
interface bandwidth, and if I try to apply a policy to an interface where I
have reserved more than 75% I should get something like this:
I/f FastEthernet0/0 class RTP requested bandwidth 9000 (kbps), available only
7500 (kbps)
but I just can't make this message come up, for some reason I am able to
reserve up to 99M on 100 M interface. I am sure am missing something simple
here and just can't see the wood for trees at this time at night. Can you help?
Thanks, Fulvio
R4#sh policy-map
Policy Map VOIP
Class RTP
priority 99000 (kbps)
R4#sh run int fa 0/0
Building configuration...
Current configuration : 145 bytes
!
interface FastEthernet0/0
ip address 150.100.40.4 255.255.255.0
ip ospf mtu-ignore
duplex auto
speed auto
service-policy output VOIP
end
R4#sh policy-map int fa 0/0
FastEthernet0/0
Service-policy output: VOIP
queue stats for all priority classes:
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 0/0
Class-map: RTP (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: protocol rtp
Priority: 99000 kbps, burst bytes 2475000, b/w exceed drops: 0
Class-map: class-default (match-any)
77 packets, 6651 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
queue limit 64 packets
(queue depth/total drops/no-buffer drops) 0/0/0
(pkts output/bytes output) 77/7624
R4#sh int fa 0/0 | in BW
MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec,
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
http://onlinestudylist.com/mailman/listinfo/ccie_rs
