Thank you Christian, Please see details below:
Mod Ports Card Type Model Serial No. --- ----- -------------------------------------- ------------------ ----------- 1 8 CEF720 8 port 10GE with DFC WS-X6708-10GE SAL1431PMV0 2 48 CEF720 48 port 10/100/1000mb Ethernet WS-X6748-GE-TX SAL1552ZC2Y 5 5 Supervisor Engine 720 10GE (Active) VS-S720-10G SAL1434RE4W Mod MAC addresses Hw Fw Sw Status --- ---------------------------------- ------ ------------ ------------ ------- 1 5475.d06e.2098 to 5475.d06e.209f 2.2 12.2(18r)S1 12.2(33)SXH8 Ok 2 70ca.9b68.b348 to 70ca.9b68.b377 4.2 12.2(18r)S1 12.2(33)SXH8 Ok 5 c47d.4ffe.1c38 to c47d.4ffe.1c3f 3.4 8.5(4) 12.2(33)SXH8 Ok Mod Sub-Module Model Serial Hw Status ---- --------------------------- ------------------ ----------- ------- ------- 1 Distributed Forwarding Card WS-F6700-DFC3C SAL1431PTEW 1.4 Ok 2 Centralized Forwarding Card WS-F6700-CFC SAL16010AP0 4.1 Ok 5 Policy Feature Card 3 VS-F6K-PFC3C SAL1434RMY0 1.2 Ok 5 MSFC3 Daughterboard VS-F6K-MSFC3 SAL1433QQK5 5.0 Ok Mod Online Diag Status ---- ------------------- 1 Pass 2 Pass 5 Pass On Thu, Jul 24, 2014 at 12:46 PM, Christian Schroeder < [email protected]> wrote: > Hi Israel, > > > on the 6509 the MTU capabilities depend on the linecard. > > Can you tell us which linecards you use? > The output of a "show module" should give us sufficient information for > further investigation. > > > Cheers, > Christian > > > > On Thu, 24 Jul 2014, Israel Ogongo wrote: > > Hi all, >> >> I am trying to implement Jumbo Frames for Backup / Data Domain purposes at >> the Data Center. >> >> The configuration is straight forward on the Nexus 5548 based on my >> different research but my CORE is a 6509 running VSS. >> >> Please if anyone has implemented Jumbo Frames in such an environment, >> would >> like to hear from you and how it has been implemented without error. I >> dont >> have a lab environment to simulate this first hence, looking for anyone >> with previous hands on... >> >> Here is the network setup: >> >> 6500A ---- 6500B >> | | >> | | >> Nexus 5kA Nexus 5KB - vPC >> | | >> | | >> Many Nexus 2Ks and the Servers are hanging off here.. >> >> The Data Domain hangs off the nexus 5548. >> >> The question is, how to enable Jumbo Frames on the 6500s - should it be on >> the interfaces participating in Port-Channel connecting to Nexus 5Ks? >> >> Would greatly appreciate your feedback. >> >> thank you, >> _______________________________________________ >> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: >> >> iPexpert on YouTube: www.youtube.com/ipexpertinc >> >> _______________________________________________ Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos :: iPexpert on YouTube: www.youtube.com/ipexpertinc
