I no longer have access to the equipment so i had to recreate it as bes as I could
----- Original Message ---- From: Gregory Jost (grjost) <[EMAIL PROTECTED]> To: Edward French <[EMAIL PROTECTED]>; CCIE Maillist <ccie_voice@onlinestudylist.com> Sent: Friday, April 18, 2008 8:08:09 PM Subject: Re: [OSL | CCIE_Voice] Weird Gatekeeper Issue <!-- _filtered {font-family:"MS Mincho";panose-1:2 2 6 9 4 2 5 8 3 4;} _filtered {font-family:Tahoma;panose-1:2 11 6 4 3 5 4 4 2 4;} _filtered {panose-1:0 0 0 0 0 0 0 0 0 0;} /* Style Definitions */ p.MsoNormal, li.MsoNormal, div.MsoNormal {margin:0in;margin-bottom:.0001pt;font-size:12.0pt;font-family:"Times New Roman";} a:link, span.MsoHyperlink {color:blue;text-decoration:underline;} a:visited, span.MsoHyperlinkFollowed {color:purple;text-decoration:underline;} span.StyleArial10ptDarkBlue {font-family:Arial;color:red;} span.EmailStyle18 {font-family:Arial;color:navy;} _filtered {margin:1.0in 1.25in 1.0in 1.25in;} div.Section1 {} --> There’s several typos in there. Can you copy in the actual config instead of typing it? Greg Jost Network Consulting Engineer Unified Communications Practice Cisco Systems, Inc. 214-274-1922 From:[EMAIL PROTECTED]:[EMAIL PROTECTED] On Behalf Of Edward French Sent: Friday, April 18, 2008 6:23PM To: CCIE Maillist Subject: [OSL | CCIE_Voice] WeirdGatekeeper Issue HQ Configured as a gatekeeper as follows Zone Local CCM ipexpert.com 172.21.100.1 zone local Branch2 ipexpet.com zone prefix CCM 1... zone prefix CCM 2... zone Prefix Branch2 3... Branch 2 configured as Int f0/0.210 ip add 10.21.202.1 255.255.255.0 h323-g v int h323-g v id Branch2 ip 172.21.100.1 h323-g v h323-id cme-gw h323-g v bind sour 10.21.201.1 The registration gets redirected but if I change the Zone from Branch2 to CMEit registers, In fact I tried several different zones but only CME or CCM wouldwork any Ideas? By the way this was on 3725's Ed