No class based shaping is done with a default class policy-map and then shape command under it.
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul and Bobs Sent: Friday, September 05, 2008 10:18 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Class based Frame relay traffic shaping I am readin some conflicting information at the moment and need some clasrification. Would the following config be consided class based traffic shaping or non class based map-class frame-relay FRTSH frame-relay cir 60800 frame-relay bc 0 frame-relay be 0 frame-relay mincir 60800 interface virtual-interface 1 ip address 1.1.1.1 255.0.0.0 ppp miltilink ppp multilink interleave ppp multilink fragment delay 10 interface ser 0 enacapsulation frame-relay frame-relay traffic-shaping interface ser 0.1 frame-relay interface-dlci 1 ppp virtual-template 1 class FRTSH Mark Cardwell | Systems Engineer | MidAtlantic | Presidio Networked Solutions 7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | mailto:[EMAIL PROTECTED] D: 571.225.0132 | http://www.presidio.com/