Do a debug RAS and check if you see an ARJ from the gatekeeper.
Try unregistering the CME from the GK and try.
Any call that uses a VOIP dialpeer will require bandwidth
authorization for 128kbps and if you have a bandwidth cac restriction
within the cme zone the call will fail.
Vik Malhi – CCIE #13890
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: [EMAIL PROTECTED]
Join our free online support and peer group communities:
http://www.IPexpert.com/communities
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
CCIE Storage Lab Certifications.
On Oct 4, 2008, at 10:00 AM, Kapil Atrish wrote:
The attached file has full config and debug output if you wish to see.
!
dial-peer voice 15 voip
destination-pattern 3700
session target ipv4:172.22.102.1
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
dial-peer voice 16 voip
service aa
incoming called-number 3700
dtmf-relay h245-alphanumeric
codec g711ulaw
no vad
!
Thanks for your time
Subject: RE: [OSL | CCIE_Voice] BACD issue - No welcome prompt
Date: Sat, 4 Oct 2008 12:39:38 -0400
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; ccie_voice@onlinestudylist.com
Can you send your dial-peer for the BACDapplication?
Scott Hardesty | Cisco Engineer | MidAtlantic | Presidio Networked
Solutions
7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | [EMAIL PROTECTED]
D: 301.313.2041 | C: 443.789.1219 | www.presidio.com
From: [EMAIL PROTECTED]:[EMAIL PROTECTED]
] On Behalf Of Kapil Atrish
Sent: Saturday, October 04, 20087:58 AM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] BACDissue - No welcome prompt
HI,
Attached is my config. I get fast busy tone and Unknown number on
display whenI dial the pilot number from any CME phone. I can dial
hunt-pilot directly andcall get routed correctly or give the aa-
pilot to hunt-pilot and ring thephones fine. Call in between phones
are setup using G711ulaw. I've tried singlevoip dial-peer with
incoming called-address and destination-pattern, reload ofrouter, re-
configure script.
Below is the snapshot of bacd config and debug voice application
seesion..
application
service queue flash:app-b-acd-2.1.0.0.tcl
param queue-len 15
param aa-hunt5 3701
param queue-manager-debugs 1
param number-of-hunt-grps 2
!
service aa flash:app-b-acd-aa-2.1.0.0.tcl
paramspace english index 1
param number-of-hunt-grps 2
param menu-timeout 6
param handoff-string aa
param dial-by-extension-option 4
paramspace english language en
param max-time-vm-retry 2
param max-extension-length 4
param aa-pilot 3700
paramspace english location flash:
param second-greeting-time 30
param welcome-prompt _bacd_welcome.au
param queue-manager-debugs 1
param call-retry-timer 15
param max-time-call-retry 600
param voice-mail 3005
paramspace english prefix en
param service-name queue
!
!
!
BR2#dir flash:
Directory of flash:/
1 -rw- 24679 <no date> app-b-
acd-2.1.0.0.tcl
2 -rw- 33870 <no date> app-b-acd-
aa-2.1.0.0.tcl
3 -rw- 75650 <no date>
en_bacd_allagentsbusy.au
4 -rw- 83291 <no date>
en_bacd_disconnect.au
5 -rw- 63055 <no date>
en_bacd_enter_dest.au
6 -rw- 37952 <no date>
en_bacd_invalidoption.au
7 -rw- 496521 <no date>
en_bacd_music_on_hold.au
8 -rw- 123446 <no date>
en_bacd_options_menu.au
9 -rw- 42978 <no date> en_bacd_welcome.au
10 -rw- 496521 Mar 012002 01:13:09 +00:01 music-on-
hold_3db.au
11 -rw- 496521 Mar 012002 02:47:07 +00:01 music-on-hold.au
536870908 bytes total (534895700 bytes free)
BR2#
BR2#
There is no output when I do debug voice application script
OUTPUT OF 'debug voice application session' is as below.
Calling no: 3002, called no: 3700
BR2#debug voice app
BR2#debug voice application sess
voip application session debugging is on
BR2#
Mar 1 03:17:40: //37//AFW_:/Closing_AnyEvent:
Mar 1 03:17:40: //37//AFW_:/Session_Cleaner:
Mar 1 03:17:40: //-1//AFW_:/C_ServiceSession_Event_Handler:
Mar 1 03:17:40: //37/8A066DCF802F/AFW_:/
C_ServiceSession_Event_Handler:Received event
CC_EV_CALL_DISCONNECT_DONE[17] in Main Loop
Mar 1 03:17:40: //37//AFW_:/AFW_M_Session_Terminate:
Mar 1 03:17:40: //-1//AFW_:HN000FF5F4:/AFW_M_Session_Free:
MOD[Session_65BFE164_0_1046004] ( )
Mar 1 03:17:42: //-1//AFW_:/C_ServiceSession_Event_Handler:
Mar 1 03:17:42: //-1//AFW_:/AFW_Session_New:
Mar 1 03:17:42: //40//AFW_:/C_PackageSession_NewCall: Session
module listenedby TclModule_65BE268C_0_1066356
Mar 1 03:17:42: //40//AFW_:/Open_SetupIndication: Calling #(3002),
Called#(), peer_tag(20002)
Mar 1 03:17:44: //40//AFW_:/GettingDest_DigitCollectDone:
status(4)discCause(0) ovrlp(TRUE)
Mar 1 03:17:44: //-1//AFW_:/C_PackageSession_GetSigPeer:
Mar 1 03:17:44: //40//AFW_:/ContactingDest_SetupDone:
Mar 1 03:17:44: //40//AFW_:/Session_Close: lastFailureCause 34
Mar 1 03:17:44: //40//AFW_:/AFW_M_Session_Terminate:
Mar 1 03:17:44: //40//AFW_:/AFW_M_Session_Terminate:
lastFailureCause 34
Mar 1 03:17:44: //40//AFW_:/Session_Cleaner:
Mar 1 03:17:47: //40//AFW_:/Closing_AnyEvent:
Mar 1 03:17:47: //40//AFW_:/Session_Cleaner:
Mar 1 03:17:47: //-1//AFW_:/C_ServiceSession_Event_Handler:
Mar 1 03:17:47: //40/96270EF58032/AFW_:/
C_ServiceSession_Event_Handler:Received event
CC_EV_CALL_DISCONNECT_DONE[17] in Main Loop
Mar 1 03:17:47: //40//AFW_:/AFW_M_Session_Terminate:
Mar 1 03:17:47: //-1//AFW_:HN00104580:/AFW_M_Session_Free:
MOD[Session_65BFE214_0_1066368] ( )
BR2#
BR2#
BR2#
BR2#
Any inputs are very welcome...
MSN Technology brings you the latest on gadgets, gizmos andthe new
hits in the gaming market. Try it now!
Voice your opinion on the burning issues of the day. Discuss, debate
with the world. Logon to message boards on MSN. Try it! <debugs.rar>
