Its local call from CME phone to bacd. No gatekeeper in between. PH1-------CME with AA/ACD-------ephone=hunt
Vikram Malhi <[EMAIL PROTECTED]> wrote: Do a debug RAS and check if you see an ARJ from the gatekeeper. Try unregistering the CME from the GK and try. Any call that uses a VOIP dialpeer will require bandwidth authorization for 128kbps and if you have a bandwidth cac restriction within the cme zone the call will fail. Vik Malhi CCIE #13890 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: [EMAIL PROTECTED] Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. On Oct 4, 2008, at 10:00 AM, Kapil Atrish wrote: The attached file has full config and debug output if you wish to see. ! dial-peer voice 15 voip destination-pattern 3700 session target ipv4:172.22.102.1 dtmf-relay h245-alphanumeric codec g711ulaw no vad ! dial-peer voice 16 voip service aa incoming called-number 3700 dtmf-relay h245-alphanumeric codec g711ulaw no vad ! Thanks for your time --------------------------------- Subject: RE: [OSL | CCIE_Voice] BACD issue - No welcome prompt Date: Sat, 4 Oct 2008 12:39:38 -0400 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED]; ccie_voice@onlinestudylist.com Can you send your dial-peer for the BACDapplication? Scott Hardesty | Cisco Engineer | MidAtlantic | Presidio Networked Solutions 7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | [EMAIL PROTECTED] D: 301.313.2041 | C: 443.789.1219 | www.presidio.com --------------------------------- From: [EMAIL PROTECTED]:[EMAIL PROTECTED] On Behalf Of Kapil Atrish Sent: Saturday, October 04, 20087:58 AM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] BACDissue - No welcome prompt HI, Attached is my config. I get fast busy tone and Unknown number on display whenI dial the pilot number from any CME phone. I can dial hunt-pilot directly andcall get routed correctly or give the aa-pilot to hunt-pilot and ring thephones fine. Call in between phones are setup using G711ulaw. I've tried singlevoip dial-peer with incoming called-address and destination-pattern, reload ofrouter, re-configure script. Below is the snapshot of bacd config and debug voice application seesion.. application service queue flash:app-b-acd-2.1.0.0.tcl param queue-len 15 param aa-hunt5 3701 param queue-manager-debugs 1 param number-of-hunt-grps 2 ! service aa flash:app-b-acd-aa-2.1.0.0.tcl paramspace english index 1 param number-of-hunt-grps 2 param menu-timeout 6 param handoff-string aa param dial-by-extension-option 4 paramspace english language en param max-time-vm-retry 2 param max-extension-length 4 param aa-pilot 3700 paramspace english location flash: param second-greeting-time 30 param welcome-prompt _bacd_welcome.au param queue-manager-debugs 1 param call-retry-timer 15 param max-time-call-retry 600 param voice-mail 3005 paramspace english prefix en param service-name queue ! ! ! BR2#dir flash: Directory of flash:/ 1 -rw- 24679 <no date> app-b-acd-2.1.0.0.tcl 2 -rw- 33870 <no date> app-b-acd-aa-2.1.0.0.tcl 3 -rw- 75650 <no date> en_bacd_allagentsbusy.au 4 -rw- 83291 <no date> en_bacd_disconnect.au 5 -rw- 63055 <no date> en_bacd_enter_dest.au 6 -rw- 37952 <no date> en_bacd_invalidoption.au 7 -rw- 496521 <no date> en_bacd_music_on_hold.au 8 -rw- 123446 <no date> en_bacd_options_menu.au 9 -rw- 42978 <no date> en_bacd_welcome.au 10 -rw- 496521 Mar 012002 01:13:09 +00:01 music-on-hold_3db.au 11 -rw- 496521 Mar 012002 02:47:07 +00:01 music-on-hold.au 536870908 bytes total (534895700 bytes free) BR2# BR2# There is no output when I do debug voice application script OUTPUT OF 'debug voice application session' is as below. Calling no: 3002, called no: 3700 BR2#debug voice app BR2#debug voice application sess voip application session debugging is on BR2# Mar 1 03:17:40: //37//AFW_:/Closing_AnyEvent: Mar 1 03:17:40: //37//AFW_:/Session_Cleaner: Mar 1 03:17:40: //-1//AFW_:/C_ServiceSession_Event_Handler: Mar 1 03:17:40: //37/8A066DCF802F/AFW_:/C_ServiceSession_Event_Handler:Received event CC_EV_CALL_DISCONNECT_DONE[17] in Main Loop Mar 1 03:17:40: //37//AFW_:/AFW_M_Session_Terminate: Mar 1 03:17:40: //-1//AFW_:HN000FF5F4:/AFW_M_Session_Free: MOD[Session_65BFE164_0_1046004] ( ) Mar 1 03:17:42: //-1//AFW_:/C_ServiceSession_Event_Handler: Mar 1 03:17:42: //-1//AFW_:/AFW_Session_New: Mar 1 03:17:42: //40//AFW_:/C_PackageSession_NewCall: Session module listenedby TclModule_65BE268C_0_1066356 Mar 1 03:17:42: //40//AFW_:/Open_SetupIndication: Calling #(3002), Called#(), peer_tag(20002) Mar 1 03:17:44: //40//AFW_:/GettingDest_DigitCollectDone: status(4)discCause(0) ovrlp(TRUE) Mar 1 03:17:44: //-1//AFW_:/C_PackageSession_GetSigPeer: Mar 1 03:17:44: //40//AFW_:/ContactingDest_SetupDone: Mar 1 03:17:44: //40//AFW_:/Session_Close: lastFailureCause 34 Mar 1 03:17:44: //40//AFW_:/AFW_M_Session_Terminate: Mar 1 03:17:44: //40//AFW_:/AFW_M_Session_Terminate: lastFailureCause 34 Mar 1 03:17:44: //40//AFW_:/Session_Cleaner: Mar 1 03:17:47: //40//AFW_:/Closing_AnyEvent: Mar 1 03:17:47: //40//AFW_:/Session_Cleaner: Mar 1 03:17:47: //-1//AFW_:/C_ServiceSession_Event_Handler: Mar 1 03:17:47: //40/96270EF58032/AFW_:/C_ServiceSession_Event_Handler:Received event CC_EV_CALL_DISCONNECT_DONE[17] in Main Loop Mar 1 03:17:47: //40//AFW_:/AFW_M_Session_Terminate: Mar 1 03:17:47: //-1//AFW_:HN00104580:/AFW_M_Session_Free: MOD[Session_65BFE214_0_1066368] ( ) BR2# BR2# BR2# BR2# Any inputs are very welcome... --------------------------------- MSN Technology brings you the latest on gadgets, gizmos andthe new hits in the gaming market. Try it now! --------------------------------- Voice your opinion on the burning issues of the day. Discuss, debate with the world. Logon to message boards on MSN. Try it! <debugs.rar>
