Hi Vik,
Yes, I mean "forward on failure". Somehow "forward no answer" takes
precedence over the "forward on failure".
Sincerely,
Mike
----- Original Message -----
From: "Vikram Malhi" <[EMAIL PROTECTED]>
To: "Michael Shavrov" <[EMAIL PROTECTED]>
Sent: Saturday, October 04, 2008 7:20 PM
Subject: Re: [OSL | CCIE_Voice] SRST Voicemail Integration
When you use the vm-integration method the call goes out with caller-
id "12122211600*2001" which is not going to be a routable number in
the real world. In Proctorlabs we route this , your gateway via
incoming significant digits strips it to the last 4, and the call gets
fwded to voicemail due to that phone being in SRST mode.
Regarding the other question- do you mean "forward on failure" since
there is no "forward unregistered"...
Vik Malhi – CCIE #13890
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: [EMAIL PROTECTED]
Join our free online support and peer group communities:
http://www.IPexpert.com/communities
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
CCIE Storage Lab Certifications.
On Oct 4, 2008, at 3:06 PM, Michael Shavrov wrote:
Hi Vik,
And what your reasoning for "do not like" this method? I tried it, and it
works, but it works only if every phone should go to VM, while with
"alias" you can specify phones individually.
Also, the question with VM/SRST integration. What should be configured at
the CallManager on Branch1 phones, to make voicemail working in both
situations, in and out of SRST mode? When I set phone "forward no-answer
and forward busy" to voicemail (through voicemail checkbox), and "forward
not registered to foll E.164 number", when site goes to SRST mode and I
call the phone, call goes to voicemail.
Good luck,
Mike
----- Original Message ----- From: "Vikram Malhi" <[EMAIL PROTECTED]>
To: "Chris Parker" <[EMAIL PROTECTED]>
Cc: <ccie_voice@onlinestudylist.com>
Sent: Saturday, October 04, 2008 4:07 PM
Subject: Re: [OSL | CCIE_Voice] SRST Voicemail Integration
Know all possible workarounds...I personally don't like the vm-
integration method. Do you know any other methods?
Vik Malhi – CCIE #13890
Senior Technical Instructor - IPexpert, Inc.
Telephone: +1.810.326.1444
Fax: +1.810.454.0130
Mailto: [EMAIL PROTECTED]
Join our free online support and peer group communities:
http://www.IPexpert.com/communities
IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-
Demand and Audio Certification Training Tools for the Cisco CCIE R&S
Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and
CCIE Storage Lab Certifications.
On Oct 4, 2008, at 6:46 AM, Chris Parker wrote:
Hello,
I have been reviewing the methods of voice mail fall back with SRST,
and I am wondering which method will actually work in the Lab? It seems
that success relies on the behavior of PSTN. The "vm- integration"
method seems to work fine on the Proctor Labs gear, but will that
translate to the real lab? What is the safest / best way to do this?
Chris Parker
