Hi Michael,

Hardware Conferencing is not supported with CCME 3.3. When you want to use a 
Hardware Conferencebridge with CCME you have to use CCME Version 4.0 or maybe 
higher, i donĀ“t remember it at the moment.

HTH

/Robert

>>> Michael Shavrov<[EMAIL PROTECTED]> schrieb am Mittwoch, 22. Oktober 2008 um
18:57 in Nachricht 93f2ba42c46071d4f82376100596cbc2:
> Hi All,
> 
> I have an ongoing problem with creating a media resources on CME router. I 
> create 2 dspfarm profiles, configure SCCP, register with CME... Transcoding 
> registeres fine, but Conferencing does not. Here is part of the config, and 
> the SCCP status:
> ----
> voice-card 0
>  dspfarm
>  dsp services dspfarm
> !
> sccp local GigabitEthernet0/0.123
> sccp ccm 10.10.66.254 identifier 1 
> sccp ip precedence 3
> sccp
> !
> sccp ccm group 1
>  bind interface GigabitEthernet0/0.123
>  associate ccm 1 priority 1
>  associate profile 1 register cfb001da10466d8
>  associate profile 2 register mtp001da10466d8
> !
> dspfarm profile 2 transcode
>  codec g711ulaw
>  codec g711alaw
>  codec g729ar8
>  codec g729abr8
>  codec g729r8
>  maximum sessions 4
>  associate application SCCP
> !
> dspfarm profile 1 conference
>  codec g711ulaw
>  codec g711alaw
>  codec g729ar8
>  codec g729abr8
>  codec g729r8
>  codec g729br8
>  maximum sessions 2
>  associate application SCCP
> !
> telephony-service
>  sdspfarm units 2
>  sdspfarm tag 1 cfb001da10466d8
>  sdspfarm tag 2 mtp001da10466d8
>  ip source-address 10.10.66.254 port 2000
>  max-conferences 2 gain -6
> !
> -----------------------------
> R7-BR2#sh sccp
> SCCP Admin State: UP
> Gateway IP Address: 142.103.66.254, Port Number: 2000
> IP Precedence: 3
> User Masked Codec list: None
> Call Manager: 142.103.66.254, Port Number: 2000
>                 Priority: N/A, Version: 3.1, Identifier: 1
> 
> Transcoding Oper State: ACTIVE - Cause Code: NONE
> Active Call Manager: 142.103.66.254, Port Number: 2000
> TCP Link Status: CONNECTED, Profile Identifier: 2
> Reported Max Streams: 8, Reported Max OOS Streams: 0
> Supported Codec: g711ulaw, Maximum Packetization Period: 30
> Supported Codec: g711alaw, Maximum Packetization Period: 30
> Supported Codec: g729ar8, Maximum Packetization Period: 60
> Supported Codec: g729abr8, Maximum Packetization Period: 60
> Supported Codec: g729r8, Maximum Packetization Period: 60
> Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
> Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
> Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization 
> Period: 30
> 
> Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause Code: CCM_REGISTER_FAILED
> Active Call Manager: 142.103.66.254, Port Number: 2000
> TCP Link Status: NOT_CONNECTED, Profile Identifier: 1
> Reported Max Streams: 16, Reported Max OOS Streams: 0
> Supported Codec: g711ulaw, Maximum Packetization Period: 30
> Supported Codec: g711alaw, Maximum Packetization Period: 30
> Supported Codec: g729ar8, Maximum Packetization Period: 60
> Supported Codec: g729abr8, Maximum Packetization Period: 60
> Supported Codec: g729r8, Maximum Packetization Period: 60
> Supported Codec: g729br8, Maximum Packetization Period: 60
> Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30
> Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30
> Supported Codec: inband-dtmf to rfc2833 conversion, Maximum Packetization 
> Period: 30

Reply via email to