Doing this scenario: CCM -- h323trunk -- GK -- CME -- ephone OK PSTN -- CME -- CUE OK CCM -- h323trunk -- GK -- CME -- CUE fails Regardless of selected codec. Any suggestions? Config from CME router: Current configuration : 6164 bytes ! ! Last configuration change at 04:09:53 UTC Sat Oct 18 2008 ! version 12.4 service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname BR2 ! boot-start-marker boot-end-marker ! enable password cisco ! no aaa new-model ! resource policy ! memory-size iomem 15 network-clock-participate slot 1 voice-card 1 dspfarm dsp services dspfarm ! ip cef ! ! no ip dhcp use vrf connected ip dhcp excluded-address 10.130.0.1 10.130.0.99 ip dhcp excluded-address 10.130.0.120 10.130.0.254 ! ip dhcp pool ITS network 10.130.0.0 255.255.255.0 option 150 ip 10.130.0.1 default-router 10.130.0.1 ! ! no ip domain lookup ! ! stcapp ccm-group 1 ! isdn switch-type primary-net5 ! ! ! voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip ! ! ! voice class codec 1 codec preference 1 g711ulaw codec preference 2 g711alaw codec preference 3 g729r8 ! ! ! ! ! ! ! ! --More-- Oct 18 04:18:16.407: h323chan_chn_process_read_socket: fd=2 of type CONNECTED has data voice translation-rule 1000 rule 1 /^76301/ /1/ ! voice translation-rule 7630 rule 1 /^1/ /76301/ ! ! voice translation-profile 4digits translate called 1000 ! voice translation-profile 8digitout translate calling 7630 ! ! ! ! ! ! controller E1 1/0 pri-group timeslots 1-3,16 ! controller E1 1/1 ! ! ! ! ! interface Loopback0 ip address 10.10.32.3 255.255.255.255 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip id ccm ipaddr 10.10.32.1 1719 h323-gateway voip tech-prefix 1 h323-gateway voip bind srcaddr 10.10.32.3 ! interface FastEthernet0/0 no ip address duplex auto speed auto ! interface FastEthernet0/0.30 description BR2 Data Vlan 30 encapsulation dot1Q 30 native ip address 10.30.0.1 255.255.255.0 no snmp trap link-status ! interface FastEthernet0/0.130 description BR2 Voice Vlan 130 encapsulation dot1Q 130 ip address 10.130.0.1 255.255.255.0 no snmp trap link-status ! interface Serial0/0 no ip address encapsulation frame-relay IETF no fair-queue frame-relay lmi-type ansi ! interface Serial0/0.1 point-to-point ip address 10.10.33.130 255.255.255.128 frame-relay interface-dlci 102 ! interface FastEthernet0/1 no ip address shutdown duplex auto speed auto ! interface Serial1/0:15 no ip address encapsulation hdlc isdn switch-type primary-net5 isdn incoming-voice voice no cdp enable ! interface Service-Engine2/0 ip unnumbered FastEthernet0/0.130 service-module ip address 10.130.0.2 255.255.255.0 service-module ip default-gateway 10.130.0.1 ! router ospf 1 log-adjacency-changes network 10.10.32.3 0.0.0.0 area 0 network 10.10.33.128 0.0.0.127 area 0 network 10.30.0.0 0.0.0.255 area 0 network 10.130.0.0 0.0.0.255 area 0 ! ip route 10.130.0.2 255.255.255.255 Service-Engine2/0 ! ! ip http server no ip http secure-server ip http path flash: --More-- Oct 18 04:19:01.435: h323chan_chn_process_read_socket: fd=2 of type CONNECTED has data ! ! ! ! tftp-server flash:P003-07-4-00.bin tftp-server flash:P003-07-4-00.sbn tftp-server flash:P00307020200.bin tftp-server flash:P00307020200.loads tftp-server flash:P00307020200.sb2 tftp-server flash:P00307020200.sbn tftp-server flash:P00403020214.bin ! control-plane ! ! ! voice-port 1/0:15 translation-profile incoming 4digits ! ccm-manager sccp local FastEthernet0/0.130 ! ! sccp local FastEthernet0/0.130 sccp sccp ccm 10.130.0.1 priority 1 sccp ip precedence 3 sccp mtp sessions 1 sccp codec g729ar8 mask sccp codec g729br8 mask sccp codec g729abr8 mask ! dspfarm transcoder maximum sessions 3 dspfarm confbridge maximum sessions 3 dspfarm codec g729 vad disable dspfarm ! ! dial-peer voice 1 pots incoming called-number . direct-inward-dial ! dial-peer voice 999 pots translation-profile outgoing 8digitout destination-pattern 999 port 1/0:15 forward-digits all ! dial-peer voice 1600 voip destination-pattern 1[126]00 voice-class codec 1 session protocol sipv2 session target ipv4:10.130.0.2 incoming called-number 1[126].. no vad ! dial-peer voice 2 voip voice-class codec 1 incoming called-number . ! gateway timer receive-rtp 1200 ! ! ! ! gatekeeper shutdown ! ! telephony-service load 7910 P00403020214 load 7960-7940 P00307020200 max-ephones 10 max-dn 15 ip source-address 10.130.0.1 port 2000 auto assign 1 to 2 service dnis dir-lookup timeouts interdigit 7 system message BR2 sdspfarm units 1 sdspfarm transcode sessions 1 sdspfarm tag 1 mtp001360f655a0 network-locale GB create cnf-files version-stamp Jan 01 2002 00:00:00 voicemail 1600 max-conferences 8 gain -6 moh flash:music-on-hold.au web admin system name admin password cisco dn-webedit time-webedit transfer-system full-consult transfer-pattern .T secondary-dialtone 9 after-hours block pattern 1 000T after-hours day Sun 00:00 23:59 after-hours day Mon 09:00 17:00 after-hours day Tue 09:00 17:00 after-hours day Wed 09:00 17:00 after-hours day Thu 09:00 17:00 after-hours day Fri 09:00 17:00 after-hours day Sat 00:00 23:59 directory entry 1 1001 name br2ph1 directory entry 2 1002 name br2ph2 ! ! ephone-dn 1 dual-line number 1001 description 2076301001 name br2ph1 call-forward all 1600 call-forward busy 1600 call-forward noan 1600 timeout 10 ! ! ephone-dn 2 dual-line --More-- Oct 18 04:19:46.463: h323chan_chn_process_read_socket: fd=2 of type CONNECTED has data number 1002 description 2076301002 name br2ph2 call-forward busy 1600 call-forward noan 1600 timeout 10 ! ! ephone-dn 3 dual-line number 1010 huntstop channel no huntstop ! ! ephone-dn 4 dual-line number 1010 preference 5 huntstop channel no huntstop ! ! ephone-dn 8 number 1998.... mwi off ! ! ephone-dn 9 number 1999.... mwi on ! ! ephone-dn 10 number 3007 paging ! ! ephone-dn 11 number 3008 paging ! ! ephone-dn 12 number 3009 paging paging group 10,11 ! ! ephone 1 username "br2ph1" password null mac-address 0016.460D.F9ED paging-dn 10 type 7960 button 1:1 2c3,4 ! ! ! ephone 2 username "br2ph2" password null mac-address 0030.94C2.8E5B paging-dn 11 type 7960 button 1:2 2c3,4 ! ! ! line con 0 exec-timeout 0 0 line 65 no activation-character no exec transport preferred none transport input all transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh line aux 0 line vty 0 4 exec-timeout 0 0 password cisco login ! ntp master ! end
Med venlig hilsen Flemming Ortvald Network System Eng. NetDesign A/S +45 7241 4346 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mark Snow Sent: 22. oktober 2008 22:39 To: Hardesty, Scott Cc: ccie_voice@onlinestudylist.com; Robert Schuknecht Subject: Re: [OSL | CCIE_Voice] Problem with PVDM-2 Conferenceregistration Conf bridge shows active in terms of registered to CUCME - but can you start a conf call between three phones and show that the dsps are actually 'in-use'? I understand that you have registered it - however I don't think it will show that the hardware dsps actually in use. The only way to do this in CUCME 3.3 was to have 2 T1's loop back-to- back to each other with a crossover cable, configure a bunch of individual trunk connections (one for each channel), and then "join" the multicast IP address sort-of 'listening in' on each trunk connection. Config is basically the same as is used in LMR deployments. Anyway - try the con-call and send us the results if you would! Cheers, -- Mark Snow CCIE #14073 (Voice, Security) Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.309.413.4097 Mailto: [EMAIL PROTECTED] -- Join our free online support and peer group communities: http://www.IPexpert.com/communities -- IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On- Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. -- On Oct 22, 2008, at 3:28 PM, Hardesty, Scott wrote: > Michael, I am running CME version 3.3 and I can register a hardware > conference Transcoder. I would make sure you have enough ephones. > > > <<<<<<<SEE BELOW, EPHONE-3 has registed using the gi0/0 interface>>>>> > > BR2#sho ephone registered > > > ephone-1 Mac:0011.BB53.7636 TCP socket:[6] activeLine:0 REGISTERED > in SCCP ver 6 > mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 > debug:0 > IP:142.107.66.11 50031 Telecaster 7940 keepalive 54 max_line 2 > button 1: dn 1 number 4001 CH1 IDLE CH2 IDLE > Username: phnOne Password: null > > > ephone-2 Mac:0014.A963.9EDF TCP socket:[5] activeLine:0 REGISTERED > in SCCP ver 6 > mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 > debug:0 > IP:142.107.66.12 50035 Telecaster 7940 keepalive 54 max_line 2 > button 1: dn 2 number 4002 CH1 IDLE CH2 IDLE > Username: phoneTwo Password: null > > > ephone-3 Mac:0011.9348.0940 TCP socket:[2] activeLine:0 REGISTERED > in SCCP ver 0 > + Authentication > mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 > debug:0 > IP:142.107.66.254 39825 Unknown 51 keepalive 6 max_line 0 > > <<<<<<<<<<<<<SEE that the SCCP Conference bridge is > ACTIVE>>>>>>>>>>>>>> > > BR2#sho > Oct 22 20:23:10.488: %SYS-5-CONFIG_I: Configured from console by > consolesccp > SCCP Admin State: UP > Gateway IP Address: 142.107.66.254, Port Number: 2000 > IP Precedence: 5 > User Masked Codec list: None > Call Manager: 142.107.71.254, Port Number: 2000 > Priority: N/A, Version: 3.1, Identifier: 1 > > Conferencing Oper State: ACTIVE - Cause Code: NONE > Active Call Manager: 142.107.71.254, Port Number: 2000 > TCP Link Status: CONNECTED, Profile Identifier: 1 > Reported Max Streams: 16, Reported Max OOS Streams: 0 > Supported Codec: g711ulaw, Maximum Packetization Period: 30 > Supported Codec: g711alaw, Maximum Packetization Period: 30 > Supported Codec: g729ar8, Maximum Packetization Period: 60 > Supported Codec: g729abr8, Maximum Packetization Period: 60 > Supported Codec: g729r8, Maximum Packetization Period: 60 > Supported Codec: g729br8, Maximum Packetization Period: 60 > Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 > > BR2#sho ver > Cisco IOS Software, 3800 Software (C3845-ADVIPSERVICESK9-M), Version > 12.4(3j), R > ELEASE SOFTWARE (fc1) > Technical Support: http://www.cisco.com/techsupport > Copyright (c) 1986-2007 by Cisco Systems, Inc. > Compiled Fri 14-Dec-07 03:18 by stshen > > ROM: System Bootstrap, Version 12.3(11r)T1, RELEASE SOFTWARE (fc1) > > BR2 uptime is 1 day, 16 hours, 39 minutes > System returned to ROM by reload at 15:23:51 CEST Mon Oct 20 2008 > System restarted at 04:44:21 CEST Tue Oct 21 2008 > System image file is "flash:c3845-advipservicesk9-mz.124-3j.bin" > > > > > Scott Hardesty | Cisco Engineer | MidAtlantic | Presidio Networked > Solutions > 7601 Ora Glen Drive, Suite 100, Greenbelt, MD 20770 | mailto:[EMAIL > PROTECTED] > D: 301.313.2041 | C: 443.789.1219 | http://www.presidio.com/ > > > -----Original Message----- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > ] On Behalf Of Michael Shavrov > Sent: Wednesday, October 22, 2008 3:01 PM > To: Robert Schuknecht; ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] Problem with PVDM-2 > Conferenceregistration > > Looks like you right - I've tried it with both, PVDM and PVDM2. In > both > cases transcoder registers instantly, but conferencing does not. I > will try > to upgrade IOS on one of the router to CME 4.0 and see if it will > solve the > problem with the same config. > > > ----- Original Message ----- > From: "Robert Schuknecht" <[EMAIL PROTECTED]> > To: <ccie_voice@onlinestudylist.com>; <[EMAIL PROTECTED]> > Sent: Wednesday, October 22, 2008 2:26 PM > Subject: Antw: [OSL | CCIE_Voice] Problem with PVDM-2 > Conferenceregistration > > >> Hi Michael, >> >> Hardware Conferencing is not supported with CCME 3.3. When you want >> to use >> a Hardware Conferencebridge with CCME you have to use CCME Version >> 4.0 or >> maybe higher, i donĀ“t remember it at the moment. >> >> HTH >> >> /Robert >> >>>>> Michael Shavrov<[EMAIL PROTECTED]> schrieb am Mittwoch, 22. >>>>> Oktober >>>>> 2008 um >> 18:57 in Nachricht 93f2ba42c46071d4f82376100596cbc2: >>> Hi All, >>> >>> I have an ongoing problem with creating a media resources on CME >>> router. >>> I >>> create 2 dspfarm profiles, configure SCCP, register with CME... >>> Transcoding >>> registeres fine, but Conferencing does not. Here is part of the >>> config, >>> and >>> the SCCP status: >>> ---- >>> voice-card 0 >>> dspfarm >>> dsp services dspfarm >>> ! >>> sccp local GigabitEthernet0/0.123 >>> sccp ccm 10.10.66.254 identifier 1 >>> sccp ip precedence 3 >>> sccp >>> ! >>> sccp ccm group 1 >>> bind interface GigabitEthernet0/0.123 >>> associate ccm 1 priority 1 >>> associate profile 1 register cfb001da10466d8 >>> associate profile 2 register mtp001da10466d8 >>> ! >>> dspfarm profile 2 transcode >>> codec g711ulaw >>> codec g711alaw >>> codec g729ar8 >>> codec g729abr8 >>> codec g729r8 >>> maximum sessions 4 >>> associate application SCCP >>> ! >>> dspfarm profile 1 conference >>> codec g711ulaw >>> codec g711alaw >>> codec g729ar8 >>> codec g729abr8 >>> codec g729r8 >>> codec g729br8 >>> maximum sessions 2 >>> associate application SCCP >>> ! >>> telephony-service >>> sdspfarm units 2 >>> sdspfarm tag 1 cfb001da10466d8 >>> sdspfarm tag 2 mtp001da10466d8 >>> ip source-address 10.10.66.254 port 2000 >>> max-conferences 2 gain -6 >>> ! >>> ----------------------------- >>> R7-BR2#sh sccp >>> SCCP Admin State: UP >>> Gateway IP Address: 142.103.66.254, Port Number: 2000 >>> IP Precedence: 3 >>> User Masked Codec list: None >>> Call Manager: 142.103.66.254, Port Number: 2000 >>> Priority: N/A, Version: 3.1, Identifier: 1 >>> >>> Transcoding Oper State: ACTIVE - Cause Code: NONE >>> Active Call Manager: 142.103.66.254, Port Number: 2000 >>> TCP Link Status: CONNECTED, Profile Identifier: 2 >>> Reported Max Streams: 8, Reported Max OOS Streams: 0 >>> Supported Codec: g711ulaw, Maximum Packetization Period: 30 >>> Supported Codec: g711alaw, Maximum Packetization Period: 30 >>> Supported Codec: g729ar8, Maximum Packetization Period: 60 >>> Supported Codec: g729abr8, Maximum Packetization Period: 60 >>> Supported Codec: g729r8, Maximum Packetization Period: 60 >>> Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 >>> Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 >>> Supported Codec: inband-dtmf to rfc2833 conversion, Maximum >>> Packetization >>> Period: 30 >>> >>> Conferencing Oper State: ACTIVE_IN_PROGRESS - Cause Code: >>> CCM_REGISTER_FAILED >>> Active Call Manager: 142.103.66.254, Port Number: 2000 >>> TCP Link Status: NOT_CONNECTED, Profile Identifier: 1 >>> Reported Max Streams: 16, Reported Max OOS Streams: 0 >>> Supported Codec: g711ulaw, Maximum Packetization Period: 30 >>> Supported Codec: g711alaw, Maximum Packetization Period: 30 >>> Supported Codec: g729ar8, Maximum Packetization Period: 60 >>> Supported Codec: g729abr8, Maximum Packetization Period: 60 >>> Supported Codec: g729r8, Maximum Packetization Period: 60 >>> Supported Codec: g729br8, Maximum Packetization Period: 60 >>> Supported Codec: rfc2833 dtmf, Maximum Packetization Period: 30 >>> Supported Codec: rfc2833 pass-thru, Maximum Packetization Period: 30 >>> Supported Codec: inband-dtmf to rfc2833 conversion, Maximum >>> Packetization >>> Period: 30 >> >