When you do no telephony setup, and telephony service again by default the 
ephones will register back as no reg/no reg both won't be in the config . Do 
reset telephony service all or best bet is to reload the CME router. No gateway 
sometime doesn't fix the problem

From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James Key
Sent: Thursday, 13 November 2008 1:27 PM
To: Greg Miglucci (gmiglucc); ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] Gatekeeper E164 registration



Thanks Greg.  Did that (several times actually) also shut down the gatekeeper, 
did a no gateway on cme and did a no telephony setup and started over.  Still 
same issue.  I was very frustrated.  Cost me valuable time and points as I was 
never able to resolve.

-----Original Message-----
From: Greg Miglucci (gmiglucc) [mailto:[EMAIL PROTECTED]
Sent: Wed 11/12/2008 7:10 PM
To: James Key; ccie_voice@onlinestudylist.com
Subject: RE: [OSL | CCIE_Voice] Gatekeeper E164 registration

Verify no-reg and then do no gateway gateway on the CME router.

________________________________

From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James Key
Sent: Wednesday, November 12, 2008 4:45 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Gatekeeper E164 registration



Had an issue where all my DNs on cme would register to Gatekeeper.  I
had no-reg defined for each number, and  it still would always register
those numbers.  Doing a no gateway and then gateway never resolved.  Did
I miss something somewhere?  I never have run into this issue during my
studies.  The one thing I didn't do was reboot the gatekeeper router.





James

NOTICE: This electronic mail message and any files transmitted with it
are intended
exclusively for the individual or entity to which it is addressed. The
message,
together with any attachment, may contain confidential and/or privileged
information.
Any unauthorized review, use, printing, saving, copying, disclosure or
distribution
is strictly prohibited. If you have received this message in error,
please
immediately advise the sender by reply email and delete all copies.

NOTICE: This electronic mail message and any files transmitted with it are 
intended

exclusively for the individual or entity to which it is addressed. The message,

together with any attachment, may contain confidential and/or privileged 
information.

Any unauthorized review, use, printing, saving, copying, disclosure or 
distribution

is strictly prohibited. If you have received this message in error, please

immediately advise the sender by reply email and delete all copies.

________________________________
CONFIDENTIALITY - The information contained in this electronic mail message is 
confidential and is intended solely for the addressee(s). If you are not an 
authorised recipient of this message please contact Getronics Australia 
immediately by reply email and destroy/delete this message from your computer. 
Any unauthorised form of reproduction of this message, or part thereof, is 
strictly prohibited.
DISCLAIMER - Unless specifically indicated otherwise, the views and opinions 
expressed in this email are those of the sender and not Getronics Australia. 
While we endeavour to protect our network from computer viruses, Getronics 
Australia does not warrant that this email or any attachments are free of 
viruses or any other defects or errors. It is the duty of the recipient to 
virus scan and otherwise test any information contained in this email before 
loading onto any computer system.

Reply via email to