PVDM 16 - Single DSP supporting 6 high complexity xcoder or 2 * 8 party conference.
It is my understanding a single 5510 DSP can not support both conference and trancoder. Check the following reference http://www.cisco.com/en/US/docs/ios/12_3/vvf_c/interop/intcnf2.html#wp100328 7 I would hazard a guess you have a T1 which is using your 2 * PVDM12, is that correct? You could reduce the number of B chans in use on the PRI, if this is the case. _____ From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Erwan Erwan Sent: 15 November 2008 15:43 To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] max session 0 - IOS Conf Bridge (failed) hi, I try to config IOS Conf Bridge and Transcode in 2811 , DSP type C5110 - Config for Transcode succeed - But config for Conference failed, it said max session 0, i think I still hv enough DSP ---------------------------------------------------------------------------- --------------------------------------------- voice-card 0 dspfarm dsp services dspfarm sccp ccm group 1 associate ccm 2 priority 2 associate ccm 1 priority 1 associate profile 1 register cfb001e7a5f9530 associate profile 2 register mtp001e7a5f9530 ! dspfarm profile 2 transcode codec g711ulaw codec g729r8 maximum sessions 2 associate application SCCP ! dspfarm profile 1 conference codec g711ulaw codec g729r8 associate application SCCP shutdown --------------------------------------------------------------- NAME: "PVDMII DSP SIMM with one DSP", DESCR: "PVDMII DSP SIMM with one DSP" PID: PVDM2-16 , VID: V01 , SN: FOC11110D7C NAME: "High Density Voice", DESCR: "High Density Voice" PID: NM-HDV= , VID: 1.1, SN: JAB05400BRG NAME: "PVDM 3-C549 Simm", DESCR: "PVDM 3-C549 Simm" PID: PVDM-12= , VID: 1.1, SN: NAME: "PVDM 3-C549 Simm", DESCR: "PVDM 3-C549 Simm" PID: PVDM-12= , VID: 1.1, SN: Thks