sip trunk question again. i have sip trunk between ccm and cme ccm ext 1001 unity subscriber cme ext 3001 cue subscriber
-ccm call cue pilot is working -cme call ccm call forward to unity is working but ccm calling cue trunk is not working. the moment the call hit cue dial-peer call get disconnected. anything i should look for? i have configured call-forward pattern .T transfer-pattern .T ! voice service voip allow-connections h323 to h323 allow-connections h323 to sip allow-connections sip to h323 allow-connections sip to sip no supplementary-service h450.2 no supplementary-service h450.3 h323 sip ! dial-peer voice 1000 voip preference 1 destination-pattern 1... session protocol sipv2 session target ipv4:10.1.200.21 (cm) dtmf-relay rtp-nte codec g711ulaw no vad dial-peer voice 20 voip destination-pattern 4... session protocol sipv2 session target ipv4:192.168.1.254 (cme) incoming called-number 74... dtmf-relay rtp-nte codec g711ulaw no vad ! dial-peer voice 3000 voip translation-profile outgoing fr-pstn destination-pattern 3333 (cue) session protocol sipv2 session target ipv4:192.168.1.253 (cue) dtmf-relay sip-notify codec g711ulaw no vad ! -------------------------------------- Power up the Internet with Yahoo! Toolbar. http://pr.mail.yahoo.co.jp/toolbar/
