I dont see codec G729br8 in there. That is the codec Call Manager uses for G729.
You did get the "call-forward pattern .T" which is good, but the codec is missing. Thanks, Ryan Trauernicht On Mon, Dec 22, 2008 at 6:33 PM, Chris Parker <cpar...@cparker.us> wrote: > What do you see when you type show sccp? > > Chris > > > ------------------------------ > From: Tony reyes <treye...@yahoo.com> > Sent: Monday, December 22, 2008 5:28 PM > To: James Key <j...@jackhenry.com>; ccie_voice@onlinestudylist.com > > Subject: Re: [OSL | CCIE_Voice] troubleshooting calls forwarded to CUE > > yep have both configured as shown below ...been looking at config fro a > while and at ths point was looking for any troublshooitng steps i may be abe > to use to find the issue here. > > *sccp local FastEthernet0/0.210 > sccp ccm 10.1.202.1 identifier 1 > sccp > ! > sccp ccm group 1 > associate ccm 1 priority 1 > associate profile 1 register mtp0015f9de54a0 > ! > dspfarm profile 1 transcode > codec g711ulaw > codec g711alaw > codec g729r8 > maximum sessions 4 > associate application SCCP* > > Then under telephony-service > > *Telephony-service > sdspfarm units 1 > sdspfarm transcode sessions 4 > sdspfarm tag 1 mtp0015f9de54a0 > voicemail 3600 > call-forward pattern .T* > ** > *ephone-dn 1 dual-line > number 3001 no-reg both > description 3313213001 > name BR2 Phone 1 > call-forward busy 3600 > call-forward noan 3600 timeout 10* > > Thanks in advance. > > Tony > ------------------------------ > *From:* James Key <j...@jackhenry.com> > *To:* Tony reyes <treye...@yahoo.com>; ccie_voice@onlinestudylist.com > *Sent:* Monday, December 22, 2008 4:10:29 PM > *Subject:* RE: [OSL | CCIE_Voice] troubleshooting calls forwarded to CUE > > Tony, > > A couple of things. Make sure you have an xcoder defined on the CME > router. Also make sure that you have call forward pattern and transfer > pattern configured under Telephony service. > > > > James > > > > > > *From:* ccie_voice-boun...@onlinestudylist.com [mailto: > ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Tony reyes > *Sent:* Monday, December 22, 2008 4:03 PM > *To:* ccie_voice@onlinestudylist.com > *Subject:* [OSL | CCIE_Voice] troubleshooting calls forwarded to CUE > > > > I'm trying to get the CS phones to leave a message at BR 2/CME CUE site and > getting a fast busy when the call is forwarded at BR2 to CUE. > > > > BR 2 phones to BR2 phones messages work fine along with MWI, CM/CS calls > to BR2/CME site calls work, but CS/CM phones get fast busy when going to CUE > VM? > > > > Any useful commands that can help me troubleshoot where the issue lies > here? > > > > Thanks in advance for the help. > > > > Tony > > > > NOTICE: This electronic mail message and any files transmitted with it are > intended > exclusively for the individual or entity to which it is addressed. The > message, > together with any attachment, may contain confidential and/or privileged > information. > Any unauthorized review, use, printing, saving, copying, disclosure or > distribution > is strictly prohibited. If you have received this message in error, please > immediately advise the sender by reply email and delete all copies. > > >