Is not my case. The only Sip incoming call leg is at CM. >From CME to IPIP GW I have a h323 dial-peers. >From IPIPGW to CM I have a SIP Trunk.
But I tried to configure the SIP outgoing dial-peer at IPIPGW as rtp-net digit-drop h245-al but it did not changed the situation. Thanks for your help. Date: Fri, 3 Apr 2009 11:31:42 -0700 From: anil...@yahoo.com Subject: Re: [OSL | CCIE_Voice] DTMF digits from CME calls to Unity does not work To: cl...@mcglamry.net; ccie_voice@onlinestudylist.com; spoli...@hotmail.com Sergio- rtp-nte uses dtmf transmission in-band and h245-a uses out of-band , that's the issue, please try following- -Configure the dtmf-relay rtp-nte digit-drop command on the incoming SIP dial-peer. On the H.323 side configure either dtmf- relay h245-alphanumeric or dtmf-relay h245-signal command. -anil --- On Fri, 4/3/09, Sergio Polizer <spoli...@hotmail.com> wrote: From: Sergio Polizer <spoli...@hotmail.com> Subject: Re: [OSL | CCIE_Voice] DTMF digits from CME calls to Unity does not work To: cl...@mcglamry.net, ccie_voice@onlinestudylist.com Date: Friday, April 3, 2009, 11:19 PM Yes, I do. It is transcoding the differents codecs from this call. A simple hold/unhold works also. The only problem is related to the DTMF. When I call to the Unity from CME phone It does not "understand" the DTMF digits. CME Phone ---h323 (h245-alp) g729---> IPIPGW----SIP(rtp-nte)g711u---->Unity From: cl...@mcglamry.net To: spoli...@hotmail.com; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] DTMF digits from CME calls to Unity does not work Date: Fri, 3 Apr 2009 10:13:02 -0400 Do you have a transcoder available and registered on the IPIPGW? This sounds like an issue where you may be having a supplementary services problem. If I'm right, you probably can't hold and unhold the call either. ----- Original Message ----- From: Sergio Polizer To: ccie_voice@onlinestudylist.com Sent: Thursday, April 02, 2009 8:08 PM Subject: [OSL | CCIE_Voice] DTMF digits from CME calls to Unity does not work Hi, I'm trying to make DTMF digits be recognize by Unity from CME calls through a IPIPGW. This is the topology: CME Phone ---h323---> IPIPGW----SIP---->Unity Please, May someone give me a suggestion? Thank You! This is the config at CME: dial-peer voice 21 voip preference 1 destination-pattern [12]... voice-class codec 1 voice-class h323 1 session target ipv4:10.2.200.21 dtmf-relay h245-alphanumeric fax protocol pass-through g711ulaw This is the config at IPIPGW: dial-peer voice 12 voip incoming called-number [12]... dtmf-relay h245-alphanumeric ! dial-peer voice 13 voip destination-pattern [12]... session protocol sipv2 session target ipv4:10.2.200.21 dtmf-relay rtp-nte (***I tried rtp-nte digit-drop h245-alp but no success) codec g711ulaw ! Quer deixar seu Messenger turbinado de emoticons? Clique aqui e baixe agora. É grátis! Quer saber qual produto Windows Live combina melhor com o seu perfil? Clique aqui e descubra! _________________________________________________________________ Faça já uma busa e ganhe um wink do Messenger. Está esperando o que? É grátis! http://www.ibud.com.br/