In fact what I mentioned are abstract from Mark'e inputs only.
--- On Sat, 4/4/09, Cliff McGlamry <cl...@mcglamry.net> wrote:
From: Cliff McGlamry <cl...@mcglamry.net>
Subject: Re: [OSL | CCIE_Voice] DTMF digits from CME calls to Unity does not
work
To: "Sergio Polizer" <spoli...@hotmail.com>, ccie_voice@onlinestudylist.com
Date: Saturday, April 4, 2009, 1:35 AM
#yiv46995317 .hmmessage P {
PADDING-RIGHT:0px;PADDING-LEFT:0px;PADDING-BOTTOM:0px;MARGIN:0px;PADDING-TOP:0px;}
#yiv46995317 {
FONT-SIZE:10pt;FONT-FAMILY:Verdana;}
I remember Mark Snow mentioning at one point that there
are certain transformations around DTMF relay that are not supported in a CUBE
environment. I think this was it.
Have you tried changing the sip config to SIP-Notify with
H245-Alpha on the H.323 side?
Mark Snow, if you're monitoring this thread, could you
please pipe up? What was the "allowed" DTMF relay transformation and what
wasn't supported?
Cliff
----- Original Message -----
From:
Sergio
Polizer
To: cl...@mcglamry.net ; ccie_voice@onlinestudylist.com
Sent: Friday, April 03, 2009 1:49
PM
Subject: RE: [OSL | CCIE_Voice] DTMF
digits from CME calls to Unity does not work
Yes, I do. It is transcoding the differents codecs from this
call. A simple hold/unhold works also.
The only problem is related to the
DTMF. When I call to the Unity from CME phone It does not "understand" the
DTMF digits.
CME Phone ---h323 (h245-alp) g729--->
IPIPGW----SIP(rtp-nte)g711u---->Unity
From: cl...@mcglamry.net
To: spoli...@hotmail.com; ccie_voice@onlinestudylist.com
Subject:
Re: [OSL | CCIE_Voice] DTMF digits from CME calls to Unity does not
work
Date: Fri, 3 Apr 2009 10:13:02 -0400
#yiv46995317 .ExternalClass .EC_hmmessage P
{padding-right:0px;padding-left:0px;padding-bottom:0px;padding-top:0px;}
#yiv46995317 .ExternalClass BODY.EC_hmmessage
{font-size:10pt;font-family:Verdana;}
Do you have a transcoder available and registered on the
IPIPGW? This sounds like an issue where you may be having a
supplementary services problem. If I'm right, you probably can't hold
and unhold the call either.
-----
Original Message -----
From:
Sergio
Polizer
To:
ccie_voice@onlinestudylist.com
Sent:
Thursday, April 02, 2009 8:08 PM
Subject:
[OSL | CCIE_Voice] DTMF digits from CME calls to Unity does not work
Hi, I'm trying to make DTMF digits be
recognize by Unity from CME calls through a IPIPGW. This is the
topology:
CME Phone ---h323--->
IPIPGW----SIP---->Unity
Please, May someone give me a
suggestion? Thank You!
This is the config at
CME:
dial-peer voice 21 voip
preference
1
destination-pattern [12]...
voice-class codec
1
voice-class h323 1
session target
ipv4:10.2.200.21
dtmf-relay h245-alphanumeric
fax protocol
pass-through g711ulaw
This is the config at IPIPGW:
dial-peer
voice 12 voip
incoming called-number [12]...
dtmf-relay
h245-alphanumeric
!
dial-peer voice 13
voip
destination-pattern [12]...
session protocol
sipv2
session target ipv4:10.2.200.21
dtmf-relay rtp-nte
(***I tried rtp-nte digit-drop h245-alp but no success)
codec
g711ulaw
!
Quer deixar seu Messenger turbinado de emoticons? Clique aqui e
baixe agora. É grátis!
Quer saber qual produto Windows Live combina melhor com o seu perfil? Clique
aqui e descubra!
