update: Removed QOS config from the interface and what do you know, it did the same, Anyone else seeing this?
On Thu, Apr 9, 2009 at 2:19 AM, <[email protected]>wrote: > Send CCIE_Voice mailing list submissions to > [email protected] > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > [email protected] > > You can reach the person managing the list at > [email protected] > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > > 1. Workbook version 3 lab6 and 10 (sean hurricane) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Thu, 9 Apr 2009 01:25:44 -0400 > From: sean hurricane <[email protected]> > Subject: [OSL | CCIE_Voice] Workbook version 3 lab6 and 10 > To: [email protected] > Message-ID: > <[email protected]> > Content-Type: text/plain; charset="iso-8859-1" > > In these two labs we were asked to configured SIP trunk over the WAN and > QOS > sections asks to allow 4 G729 calls across the WAN, since the codec for SIP > trunks has to be G711ulaw, this does not allow enough bandwidth. my > priority > statements are set at 103 for regular frame and 109 for frame relay with > FRF.12. The calls goes through successfully and supplementary services work > but while on the call, my ospf neighbor relationship resets and > re-establish > and phones reset especially site B. i have compared with solution will > ipexpert's solution and its the same. is anyone else seeing this? Vik or > mark can you chime in? > > On Wed, Apr 8, 2009 at 11:06 PM, <[email protected] > >wrote: > > > Send CCIE_Voice mailing list submissions to > > [email protected] > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > or, via email, send a message with subject or body 'help' to > > [email protected] > > > > You can reach the person managing the list at > > [email protected] > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of CCIE_Voice digest..." > > > > > > Today's Topics: > > > > 1. Re: Off topic: Cisco UCM 7.x versus Microsoft OCS R2 > > (Nara Shikamaru) > > 2. Re: Off topic: Cisco UCM 7.x versus Microsoft OCS R2 > > (Chris Parker) > > 3. Re: Off topic: Cisco UCM 7.x versus MicrosoftOCS R2 > > (Cliff McGlamry) > > 4. ISDN Q931 shows Cause i = 0x80A9 - Temporary failure (H.323 > > Gateway) (Jarrod Phelps) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Wed, 8 Apr 2009 14:34:57 -0700 > > From: Nara Shikamaru <[email protected]> > > Subject: Re: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus > > Microsoft OCS R2 > > To: Mark Davis <[email protected]> > > Cc: "[email protected]" <[email protected]>, > > Michael Ciarfello <[email protected]> > > Message-ID: > > <[email protected]> > > Content-Type: text/plain; charset="iso-8859-1" > > > > I've been asking about OCS myself. Currently I am working in a CUCM 6 > > environment and I am of the oppinion that a platform can't be taken too > > seriously unless it has a strong call center product. I've asked around > to > > see if MS has one but no one has been able to tell me. > > > > On Wed, Apr 8, 2009 at 1:30 PM, Mark Davis <[email protected]> > wrote: > > > > > Michael, > > > > > > I hear you and agree. > > > > > > After speaking with my CIO (who just got back from his koolaid fest at > > > Redmond), his interest isn't in length of time a company has worked > > > with a product. In his view, of course a Microsoft with 3 years of > > > experience can't compete with a Cisco of 10 years, in the sense of how > > > many features the product may have or how polished it may be. > > > > > > The most important aspect is cost and functionality. He has tasked me > > > to list the "must have" features UCM has that we use, and some "nice > > > to haves" that would come with version 7.x that we could implement in > > > 6 months or less. Then I'll need to see how it compares with the > > > features OCS has. > > > > > > Looks like I'll be labbing up OCS R2 over the weekend and reading some > > > white papers. I'm going to do as you suggest and get some answers on > > > hardware supportability. I'd also like to see the product in action, > > > both at Microsoft's southeastern regional office in North Carolina, > > > and at a customer's site. > > > > > > On Tue, Apr 7, 2009 at 9:24 PM, Michael Ciarfello > > > <[email protected]> wrote: > > > > A mature product with 8+ years of experience and companies that have > > many > > > tens of thousands of endpoints on some of the largest companies in the > > world > > > vs a new technology that just came out. > > > > > > > > You need to ask questions on supportability (how is MS supporting > > > hardware phones, gateways, trunks, etc.) Is MS using other vendors > > products > > > for these? Not everyone is just going to use IM and their phone as > their > > > voice communications as much as MS wants to get rid fo the desk phone. > > > > > > > > End-user acceptance. What applications in OCS are end-users really > > going > > > to use. If mostly just dial-tone then you know what to evaluate. > > > > > > > > References. What installs does MS have? > > > > > > > > ________________________________________ > > > > From: [email protected] [ > > > [email protected]] On Behalf Of Mark Davis [ > > > [email protected]] > > > > Sent: Tuesday, April 07, 2009 10:05 AM > > > > To: [email protected] > > > > Subject: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus Microsoft > > OCS > > > R2 > > > > > > > > I know this is off topic but I hope the moderators will allow this > > > > question... to the engineers here that may be familiar with both > > > > products, how do they stack up against each other? How do they > > > > compare? > > > > > > > > I've been tasked to go on a fact finding mission on both products by > > > > my CIO. Given my background, I'm biased towards UCM 7.x, but we are > > > > going to demo both. I'm not at all familiar with OCS. I'm also > burning > > > > up google and I thought I'd ask the group here in case anyone had any > > > > particular insights on this. > > > > > > > > Thanks! > > > > > > > > > > > > > > > -- > > -Shikamaru > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > > http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090408/1411f921/attachment-0001.htm > > > > ------------------------------ > > > > Message: 2 > > Date: Wed, 08 Apr 2009 18:46:57 -0400 > > From: Chris Parker <[email protected]> > > Subject: Re: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus > > Microsoft OCS R2 > > To: Azmat Marwat <[email protected]> > > Cc: "[email protected]" <[email protected]>, > > Michael Ciarfello <[email protected]> > > Message-ID: <[email protected]> > > Content-Type: text/plain; charset=ISO-8859-1; format=flowed > > > > > > Personally I am waiting for Apple / ATT to announce their Unified PBX > > for the iPhone ... Goodbye desk phones .... :-) > > > > Azmat Marwat wrote: > > > Microsoft and Cisco are going to be major players in the Unified > > > Communicatioins field. > > > > > > Microsoft claims that their UC product is superior with respect to > > > cost, integration and ROI, and that true Unified Communications is > > > only theirs, while its competitors are just renaming their products to > > > incluse the words 'Unified Communications', for example from 'Cisco > > > CallManager' to 'Cisco Unified Communications Manager'. > > > > > > > > > Regards, > > > > > > Azmat Khan > > > Telecommunications Specialist > > > > > > > > > > > > > > > On Wed, Apr 8, 2009 at 4:30 PM, Mark Davis <[email protected] > > > <mailto:[email protected]>> wrote: > > > > > > Michael, > > > > > > I hear you and agree. > > > > > > After speaking with my CIO (who just got back from his koolaid fest > > at > > > Redmond), his interest isn't in length of time a company has worked > > > with a product. In his view, of course a Microsoft with 3 years of > > > experience can't compete with a Cisco of 10 years, in the sense of > > how > > > many features the product may have or how polished it may be. > > > > > > The most important aspect is cost and functionality. He has tasked > me > > > to list the "must have" features UCM has that we use, and some > "nice > > > to haves" that would come with version 7.x that we could implement > in > > > 6 months or less. Then I'll need to see how it compares with the > > > features OCS has. > > > > > > Looks like I'll be labbing up OCS R2 over the weekend and reading > > some > > > white papers. I'm going to do as you suggest and get some answers > on > > > hardware supportability. I'd also like to see the product in > action, > > > both at Microsoft's southeastern regional office in North Carolina, > > > and at a customer's site. > > > > > > On Tue, Apr 7, 2009 at 9:24 PM, Michael Ciarfello > > > <[email protected] <mailto:[email protected]>> wrote: > > > > A mature product with 8+ years of experience and companies that > > > have many tens of thousands of endpoints on some of the largest > > > companies in the world vs a new technology that just came out. > > > > > > > > You need to ask questions on supportability (how is MS > > > supporting hardware phones, gateways, trunks, etc.) Is MS using > > > other vendors products for these? Not everyone is just going to > > > use IM and their phone as their voice communications as much as MS > > > wants to get rid fo the desk phone. > > > > > > > > End-user acceptance. What applications in OCS are end-users > > > really going to use. If mostly just dial-tone then you know what > > > to evaluate. > > > > > > > > References. What installs does MS have? > > > > > > > > ________________________________________ > > > > From: [email protected] > > > <mailto:[email protected]> > > > [[email protected] > > > <mailto:[email protected]>] On Behalf Of Mark > > > Davis [[email protected] <mailto:[email protected]>] > > > > Sent: Tuesday, April 07, 2009 10:05 AM > > > > To: [email protected] > > > <mailto:[email protected]> > > > > Subject: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus > > > Microsoft OCS R2 > > > > > > > > I know this is off topic but I hope the moderators will allow > this > > > > question... to the engineers here that may be familiar with both > > > > products, how do they stack up against each other? How do they > > > > compare? > > > > > > > > I've been tasked to go on a fact finding mission on both products > > by > > > > my CIO. Given my background, I'm biased towards UCM 7.x, but we > are > > > > going to demo both. I'm not at all familiar with OCS. I'm also > > > burning > > > > up google and I thought I'd ask the group here in case anyone > > > had any > > > > particular insights on this. > > > > > > > > Thanks! > > > > > > > > > > > > > > > > > > ------------------------------ > > > > Message: 3 > > Date: Wed, 8 Apr 2009 21:06:34 -0400 > > From: "Cliff McGlamry" <[email protected]> > > Subject: Re: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus > > MicrosoftOCS R2 > > To: "Nara Shikamaru" <[email protected]>, "Mark Davis" > > <[email protected]> > > Cc: [email protected], Michael Ciarfello > > <[email protected]> > > Message-ID: <[email protected]> > > Content-Type: text/plain; charset="iso-8859-1" > > > > Of course they have one. It's a hidden feature in Microsoft Exchange. > > Callers to the ACD are delivered directly to your e mail box. > > > > ----- Original Message ----- > > From: Nara Shikamaru > > To: Mark Davis > > Cc: [email protected] ; Michael Ciarfello > > Sent: Wednesday, April 08, 2009 5:34 PM > > Subject: Re: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus > > MicrosoftOCS R2 > > > > > > I've been asking about OCS myself. Currently I am working in a CUCM 6 > > environment and I am of the oppinion that a platform can't be taken too > > seriously unless it has a strong call center product. I've asked around > to > > see if MS has one but no one has been able to tell me. > > > > > > On Wed, Apr 8, 2009 at 1:30 PM, Mark Davis <[email protected]> > wrote: > > > > Michael, > > > > I hear you and agree. > > > > After speaking with my CIO (who just got back from his koolaid fest at > > Redmond), his interest isn't in length of time a company has worked > > with a product. In his view, of course a Microsoft with 3 years of > > experience can't compete with a Cisco of 10 years, in the sense of how > > many features the product may have or how polished it may be. > > > > The most important aspect is cost and functionality. He has tasked me > > to list the "must have" features UCM has that we use, and some "nice > > to haves" that would come with version 7.x that we could implement in > > 6 months or less. Then I'll need to see how it compares with the > > features OCS has. > > > > Looks like I'll be labbing up OCS R2 over the weekend and reading some > > white papers. I'm going to do as you suggest and get some answers on > > hardware supportability. I'd also like to see the product in action, > > both at Microsoft's southeastern regional office in North Carolina, > > and at a customer's site. > > > > > > On Tue, Apr 7, 2009 at 9:24 PM, Michael Ciarfello > > <[email protected]> wrote: > > > A mature product with 8+ years of experience and companies that have > > many tens of thousands of endpoints on some of the largest companies in > the > > world vs a new technology that just came out. > > > > > > You need to ask questions on supportability (how is MS supporting > > hardware phones, gateways, trunks, etc.) Is MS using other vendors > products > > for these? Not everyone is just going to use IM and their phone as their > > voice communications as much as MS wants to get rid fo the desk phone. > > > > > > End-user acceptance. What applications in OCS are end-users really > > going to use. If mostly just dial-tone then you know what to evaluate. > > > > > > References. What installs does MS have? > > > > > > ________________________________________ > > > From: [email protected] [ > > [email protected]] On Behalf Of Mark Davis [ > > [email protected]] > > > Sent: Tuesday, April 07, 2009 10:05 AM > > > To: [email protected] > > > Subject: [OSL | CCIE_Voice] Off topic: Cisco UCM 7.x versus > Microsoft > > OCS R2 > > > > > > I know this is off topic but I hope the moderators will allow this > > > question... to the engineers here that may be familiar with both > > > products, how do they stack up against each other? How do they > > > compare? > > > > > > I've been tasked to go on a fact finding mission on both products by > > > my CIO. Given my background, I'm biased towards UCM 7.x, but we are > > > going to demo both. I'm not at all familiar with OCS. I'm also > burning > > > up google and I thought I'd ask the group here in case anyone had > any > > > particular insights on this. > > > > > > Thanks! > > > > > > > > > > > > > -- > > -Shikamaru > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > > http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090408/3da2d746/attachment-0001.htm > > > > ------------------------------ > > > > Message: 4 > > Date: Wed, 8 Apr 2009 19:11:50 -0700 > > From: Jarrod Phelps <[email protected]> > > Subject: [OSL | CCIE_Voice] ISDN Q931 shows Cause i = 0x80A9 - > > Temporary failure (H.323 Gateway) > > To: [email protected] > > Message-ID: > > <[email protected]> > > Content-Type: text/plain; charset="iso-8859-1" > > > > I'm seeing this error > > > > *Cause i = 0x80A9 - Temporary failure* > > > > Call is established then disconnects > > > > My config is below > > > > Any help would be great :-) > > > > Apr 9 02:28:29.924: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8 callref = > > 0x0086 > > Bearer Capability i = 0x8090A2 > > Standard = CCITT > > Transfer Capability = Speech > > Transfer Mode = Circuit > > Transfer Rate = 64 kbit/s > > Channel ID i = 0xA98383 > > Exclusive, Channel 3 > > Calling Party Number i = 0x2181, '6175292003' > > Plan: > > Pod19-BR1-RTR#ISDN, Type:National > > Called Party Number i = 0x80, '12122291003' > > Plan:Unknown, Type:Unknown > > *Apr 9 02:28:29.948: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8 > callref > > = 0x8086 > > Channel ID i = 0xA98383 > > Exclusive, Channel 3 > > *Apr 9 02:28:29.984: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8 > callref > > = > > 0x8086 > > Progress Ind i = 0x8088 - In-band info or appropriate now > available > > Pod19-BR1-RTR# > > *Apr 9 02:28:31.456: ISDN Se0/0/0:23 Q931: RX <- CONNECT pd = 8 callref > = > > 0x8086 > > Display i = 'HQ Phone3' > > *Apr 9 02:28:31.456: %ISDN-6-CONNECT: Interface Serial0/0/0:2 is now > > connected to 12122291003 N/A > > Pod19-BR1-RTR# > > *Apr 9 02:28:31.460: ISDN Se0/0/0:23 Q931: TX -> CONNECT_ACK pd = 8 > > callref = 0x0086 > > Pod19-BR1-RTR# > > *Apr 9 02:28:34.044: %ISDN-6-DISCONNECT: Interface Serial0/0/0:2 > > disconnected from 12122291003 , call lasted 2 seconds > > Pod19-BR1-RTR# > > *Apr 9 02:28:34.048: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8 > > callref > > = 0x0086 > > * Cause i = 0x80A9 - Temporary failure* > > *Apr 9 02:28:34.056: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8 callref > = > > 0x8086 > > *Apr 9 02:28:34.060: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8 > > callref = 0x0086 > > > > > > Config > > > > network-clock-participate wic 0 > > network-clock-select 1 T1 0/0/0 > > ! > > isdn switch-type primary-ni > > ! > > voice service voip > > allow-connections h323 to h323 > > h323 > > ! > > voice class codec 1 > > codec preference 1 g729r8 > > ! > > voice class h323 1 > > h225 timeout tcp establish 3 > > h225 timeout setup 3 > > ! > > voice translation-rule 1 > > rule 1 /^617529\(2...$\)/ /\1/ > > ! > > ! > > voice translation-profile ANI > > translate called 1 > > ! > > controller T1 0/0/0 > > framing esf > > linecode b8zs > > pri-group timeslots 1-3,24 > > ! > > interface Loopback0 > > ip address 172.9.101.1 255.255.255.255 > > ip ospf network point-to-point > > h323-gateway voip interface > > h323-gateway voip bind srcaddr 172.9.101.1 > > ! > > interface Serial0/0/0:23 > > no ip address > > isdn switch-type primary-ni > > isdn incoming-voice voice > > no cdp enable > > ! > > voice-port 0/0/0:23 > > translation-profile incoming ANI > > ! > > dial-peer voice 100 voip > > voice-class codec 1 > > voice-class h323 1 > > incoming called-number . > > dtmf-relay h245-alphanumeric > > no vad > > ! > > dial-peer voice 101 voip > > destination-pattern 2...$ > > voice-class codec 1 > > voice-class h323 1 > > session target ipv4:10.9.200.20 > > dtmf-relay h245-alphanumeric > > no vad > > ! > > dial-peer voice 102 voip > > preference 1 > > destination-pattern 2...$ > > voice-class codec 1 > > voice-class h323 1 > > session target ipv4:10.9.200.21 > > dtmf-relay h245-alphanumeric > > no vad > > ! > > dial-peer voice 1000 pots > > destination-pattern 911 > > port 0/0/0:23 > > forward-digits 3 > > ! > > dial-peer voice 200 pots > > incoming called-number . > > direct-inward-dial > > ! > > dial-peer voice 1001 pots > > destination-pattern 1......... > > port 0/0/0:23 > > forward-digits 11 > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > > > http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090408/c3c4d3f2/attachment.htm > > > > ------------------------------ > > > > _______________________________________________ > > CCIE_Voice mailing list > > [email protected] > > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > > > > > End of CCIE_Voice Digest, Vol 38, Issue 59 > > ****************************************** > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > http://onlinestudylist.com/pipermail/ccie_voice/attachments/20090409/cf4f0f66/attachment.htm > > ------------------------------ > > _______________________________________________ > CCIE_Voice mailing list > [email protected] > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > > End of CCIE_Voice Digest, Vol 38, Issue 61 > ****************************************** >
