Hi, I had the same issue and posted a request @ http://www.onlinestudylist.com/pipermail/ccie_voice/2009-April/011277.html.
As for as I understand from the behavior, load balance works only when an active conference. Put all the SW CFB’s in one MRG. Make a conference in HQ phones and it uses Pub CFB. Now make a conference in site B and it uses Sub CFB. Now, stop conference in HQ and restart it again, it uses Pub CFB. Now, you can see 2 CFB resources used in Pub and 1 used in Sub. Which is what I obsereved after spending lots of time with configuration and SRND. If someone knows better idea, please share it with me. Also let me know if it works for you. Best regards, Prabahar On Thu, Apr 9, 2009 at 8:10 AM, <ccie_voice-requ...@onlinestudylist.com> wrote: > Date: Thu, 9 Apr 2009 14:22:26 +0200 > From: "marwa" <marwa_ah...@seegypt.com> > Subject: Re: [OSL | CCIE_Voice] Conf bridge per session load balancing > To: <ccie_voice@onlinestudylist.com> > > hi, > > the conf is done but it always goes to the sub , and i am testing using > g711, i even tried to put the hardware conf (hq+ site b)only in the MRG and > put all the rest in another group, but still same issue it goes to one only > > has anyone tested this > > > > Eng./ Marwa Ahmed , M.Sc. > Systems Engineering of Egypt (S.E.E) > CCVP > Cisco IP Communications Support Specialist > CCNP > Senior Customer Support Engineer > Tel : +2 02 22921100 > Fax : +2 02 22901673 > e-mail : marwa_ah...@seegypt.com > ----- Original Message ----- > From: "Linda Mordosky (lmordosk)" <lmord...@cisco.com> > To: "marwa" <marwa_ah...@seegypt.com>; "Cliff McGlamry" > <cl...@mcglamry.net>; "Chris Parker" <cpar...@cparker.us> > Cc: <ccie_voice@onlinestudylist.com> > Sent: Thursday, April 09, 2009 1:59 PM > Subject: RE: [OSL | CCIE_Voice] Conf bridge per session load balancing > > > Remember that the SW conference bridges only support G711. > > > -----Original Message----- > From: ccie_voice-boun...@onlinestudylist.com > [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of marwa > Sent: Thursday, April 09, 2009 5:50 AM > To: Cliff McGlamry; Chris Parker > Cc: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] Conf bridge per session load balancing > > hi, > > i have tried it as Cliff suggested, but i still see all the conf goes > out of > the sub, althought the RMG contains both sub and pub > have it worked with anyone?? > > > ----- Original Message ----- > From: "Cliff McGlamry" <cl...@mcglamry.net> > To: "Chris Parker" <cpar...@cparker.us> > Cc: <ccie_voice@onlinestudylist.com> > Sent: Monday, April 06, 2009 4:16 PM > Subject: Re: [OSL | CCIE_Voice] Conf bridge per session load balancing > > >> Put them in the same MRG, and it's automatic from there. >> >> Cliff >> >> ----- Original Message ----- >> From: "Chris Parker" <cpar...@cparker.us> >> To: "OSL Group" <ccie_voice@onlinestudylist.com> >> Sent: Monday, April 06, 2009 10:11 AM >> Subject: [OSL | CCIE_Voice] Conf bridge per session load balancing >> >> >> Hello, >> >> I have an interesting requirement. I need to have the conference > bridges >> on the pub and sub be available to all phones, but I need each >> conference to be set up on each bridge in a round robin fashion. For >> example HQ phone 1 starts an ad hoc conference, that conference would > be >> on the sub conference bridge. The next ad hoc would occur on the pub. >> Then after that on the sub again. >> >> Is accomplishing this as simple as having both conf devices in the > same >> Device Pool / MRG / MRGL? or is there more that needs to be done? >> >> Chris
