hi,
to see it add the tech prefix under the interface in cme
----- Original Message -----
From: jeremy co
To: Cliff McGlamry ; Sergio Polizer
Cc: Marwa Ahmed ; Arshad Dhunna ; ccie_voice@onlinestudylist.com
Sent: Friday, April 17, 2009 4:24 PM
Subject: Re: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
Hi,
interface Loopback0
ip address 150.1.66.254 255.255.255.0
h323-gateway voip interface
h323-gateway voip id CME ipaddr 150.1.64.114 1719
h323-gateway voip h323-id RS2
h323-gateway voip bind srcaddr 150.1.66.254
CME is registered.
C2600#sh gatekeeper end
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
150.1.64.11 2059 150.1.64.11 3776 CCM VOIP-GW
H323-ID: GK_Trunk_1
Voice Capacity Max.= Avail.= Current.= 0
150.1.66.254 1720 150.1.66.254 50245 CME VOIP-GW
E164-ID: 6003
E164-ID: 6004
H323-ID: RS2
Voice Capacity Max.= Avail.= Current.= 0
Total number of active registrations = 2
I made a call with dot configuration and it worked.
ANy way why I cannot see CME under sh gatekeeper gw?
Sergio I have them under gw interface
Any idea?
Cheers
Jeremy
On Sat, Apr 18, 2009 at 12:13 AM, Cliff McGlamry <cl...@mcglamry.net> wrote:
Just because the dots show up doesn't mean they will work....but heck, give
it a try. We all might learn something.
If CME won't register, what does the output of the show gateway command on
CME show? And please post the configuration of the interface where you engaged
the h323-gateway commands.
----- Original Message -----
From: jeremy co
To: Marwa Ahmed ; Cliff McGlamry ; Arshad Dhunna
Cc: ccie_voice@onlinestudylist.com
Sent: Friday, April 17, 2009 9:51 AM
Subject: Re: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
complete configuration is here:
SUB is not started though.
gatekeeper
zone local CME cisco.com 150.1.64.114
zone local CCM cisco.com
no zone subnet CME default enable
zone subnet CME 150.1.66.254/32 enable
no zone subnet CCM default enable
zone subnet CCM 150.1.64.11/32 enable
zone subnet CCM 150.1.64.12/32 enable
zone prefix CME 2404....
zone prefix CCM 3... gw-priority 10 GK_Trunk_2
zone prefix CCM 3... gw-priority 9 GK_Trunk_1
zone prefix CCM 408*
zone prefix CME 5... gw-priority 10 RS2
zone prefix CME 6... gw-priority 10 RS2
zone prefix CME 6... gw-priority 0 GK_Trunk_1 GK_Trunk_2
gw-type-prefix 1#* default-technology
no shutdown
GATEWAY TYPE PREFIX TABLE
=========================
Prefix: 1#* (Default gateway-technology)
Zone CCM master gateway list:
150.1.64.11:3865 GK_1
Zone CCM prefix 3... priority gateway list(s):
Priority 9:
150.1.64.11:3865 GK_1
configuration with dot style is working. like 3... instead of 3*
but I cannot see CME under show gatekeeper gw command
Any idea?
Jeremy
On Fri, Apr 17, 2009 at 8:00 AM, Marwa Ahmed <marwa_ah...@seegypt.com>
wrote:
hi,
is the cme registered? also do u have another local zone called CME
other than CCM
------------------------------------------------------------------------
From: ccie_voice-boun...@onlinestudylist.com on behalf of jeremy co
Sent: Thu 4/16/2009 7:55 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem
Hi,
I cannot make trunk prefix and GW priority showing up under "sh
gatekeeper gw"
zone local CCM cisco.com
zone prefix CME 6... gw-priority 10 RS2
no shutdown
GK#sh gatekeeper g
GATEWAY TYPE PREFIX TABLE
=========================
I got nothing here
any idea?
Jeremy
