They can overlap. It's okay for it to be that way as long as you have zone prefixes defined. Or give it a different prefix....but you need one in there for it to show up under that command.
----- Original Message ----- From: jeremy co To: marwa Cc: ccie_voice@onlinestudylist.com Sent: Friday, April 17, 2009 10:37 AM Subject: Re: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem 1# is a default prefix for call manager, I added it already in CCM config Jeremy On Sat, Apr 18, 2009 at 12:31 AM, marwa <marwa_ah...@seegypt.com> wrote: hi, to see it add the tech prefix under the interface in cme ----- Original Message ----- From: jeremy co To: Cliff McGlamry ; Sergio Polizer Cc: Marwa Ahmed ; Arshad Dhunna ; ccie_voice@onlinestudylist.com Sent: Friday, April 17, 2009 4:24 PM Subject: Re: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem Hi, interface Loopback0 ip address 150.1.66.254 255.255.255.0 h323-gateway voip interface h323-gateway voip id CME ipaddr 150.1.64.114 1719 h323-gateway voip h323-id RS2 h323-gateway voip bind srcaddr 150.1.66.254 CME is registered. C2600#sh gatekeeper end GATEKEEPER ENDPOINT REGISTRATION ================================ CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags --------------- ----- --------------- ----- --------- ---- ----- 150.1.64.11 2059 150.1.64.11 3776 CCM VOIP-GW H323-ID: GK_Trunk_1 Voice Capacity Max.= Avail.= Current.= 0 150.1.66.254 1720 150.1.66.254 50245 CME VOIP-GW E164-ID: 6003 E164-ID: 6004 H323-ID: RS2 Voice Capacity Max.= Avail.= Current.= 0 Total number of active registrations = 2 I made a call with dot configuration and it worked. ANy way why I cannot see CME under sh gatekeeper gw? Sergio I have them under gw interface Any idea? Cheers Jeremy On Sat, Apr 18, 2009 at 12:13 AM, Cliff McGlamry <cl...@mcglamry.net> wrote: Just because the dots show up doesn't mean they will work....but heck, give it a try. We all might learn something. If CME won't register, what does the output of the show gateway command on CME show? And please post the configuration of the interface where you engaged the h323-gateway commands. ----- Original Message ----- From: jeremy co To: Marwa Ahmed ; Cliff McGlamry ; Arshad Dhunna Cc: ccie_voice@onlinestudylist.com Sent: Friday, April 17, 2009 9:51 AM Subject: Re: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem complete configuration is here: SUB is not started though. gatekeeper zone local CME cisco.com 150.1.64.114 zone local CCM cisco.com no zone subnet CME default enable zone subnet CME 150.1.66.254/32 enable no zone subnet CCM default enable zone subnet CCM 150.1.64.11/32 enable zone subnet CCM 150.1.64.12/32 enable zone prefix CME 2404.... zone prefix CCM 3... gw-priority 10 GK_Trunk_2 zone prefix CCM 3... gw-priority 9 GK_Trunk_1 zone prefix CCM 408* zone prefix CME 5... gw-priority 10 RS2 zone prefix CME 6... gw-priority 10 RS2 zone prefix CME 6... gw-priority 0 GK_Trunk_1 GK_Trunk_2 gw-type-prefix 1#* default-technology no shutdown GATEWAY TYPE PREFIX TABLE ========================= Prefix: 1#* (Default gateway-technology) Zone CCM master gateway list: 150.1.64.11:3865 GK_1 Zone CCM prefix 3... priority gateway list(s): Priority 9: 150.1.64.11:3865 GK_1 configuration with dot style is working. like 3... instead of 3* but I cannot see CME under show gatekeeper gw command Any idea? Jeremy On Fri, Apr 17, 2009 at 8:00 AM, Marwa Ahmed <marwa_ah...@seegypt.com> wrote: hi, is the cme registered? also do u have another local zone called CME other than CCM -------------------------------------------------------------------- From: ccie_voice-boun...@onlinestudylist.com on behalf of jeremy co Sent: Thu 4/16/2009 7:55 PM To: ccie_voice@onlinestudylist.com Subject: [OSL | CCIE_Voice] Gatekeeper ,priority gw problem Hi, I cannot make trunk prefix and GW priority showing up under "sh gatekeeper gw" zone local CCM cisco.com zone prefix CME 6... gw-priority 10 RS2 no shutdown GK#sh gatekeeper g GATEWAY TYPE PREFIX TABLE ========================= I got nothing here any idea? Jeremy