When I send digits to 3001 phone from PSTN phone, I can see the digits. Whereas if I call from HQ to BR1 over PSTN, I can't see the digits coming to BR1 gw. But I hear the digit press sound on BR1 phone. I guess, my PSTN is having problems. Let me recheck my PSTN configs.
Thanks. BR1# BR1# *Apr 21 17:01:28.247: //83/72BC98768005/VTSP:(2/1:23):-1:1:1/vtsp_dsm_digit_begin_cb: *Apr 21 17:01:28.247: //83/72BC98768005/VTSP:(2/1:23):-1:1:1/vtsp_dsm_digit_begin_cb: Begin Digit=5 *Apr 21 17:01:28.247: //84/72BC98768005/VTSP:(50/0/1):-1:0:1/vtsp_call_digit_begin: Begin Digit=5 *Apr 21 17:01:28.327: //83/72BC98768005/VTSP:(2/1:23):-1:1:1/vtsp_dsm_digit_end_cb: *Apr 21 17:01:28.327: //83/72BC98768005/VTSP:(2/1:23):-1:1:1/vtsp_timer_stop: Timer Stop Time=6580974 *Apr 21 17:01:28.327: //83/72BC98768005/VTSP:(2/1:23):-1:1:1/vtsp_dsm_digit_end_cb: End Digit=5 *Apr 21 17:01:28.327: //84/72BC98768005/VTSP:(50/0/1):-1:0:1/vtsp_call_digit_end: End Digit=5, Duration=115 BR1# On Tue, Apr 21, 2009 at 12:24 PM, anil batra <[email protected]> wrote: > Although in case WAN is up when you call into from PSTN the call will be > forwarded to Unity thru WAN but may be somehting weird at PSTN end. Jsut > trying to do isolaton here. > > --- On Wed, 4/22/09, anil batra <[email protected]> wrote: > > From: anil batra <[email protected]> > Subject: Re: [OSL | CCIE_Voice] DTMF digits over PSTN trunk > To: [email protected], "Prabahar M" <[email protected]> > Date: Wednesday, April 22, 2009, 12:51 AM > > What hapens when you call from PSTN phone or from HQ thru PSTN into BR1 , > does it accpets dtmf digits then, may be somehow ur PSTN is not passing DTMF > digits, just a thought. > > --- On Wed, 4/22/09, Prabahar M <[email protected]> wrote: > > From: Prabahar M <[email protected]> > Subject: [OSL | CCIE_Voice] DTMF digits over PSTN trunk > To: [email protected] > Date: Wednesday, April 22, 2009, 12:34 AM > > Hi, > I am having T1 PRI between BR1 and HQ through PSTN. When the WAN is > up the DTMF digits are going fine and 3001 phone login to its voice > mail box with PIN. But when is on AAR or SRST, the calls are connected > to VM with correct mailbox but the DTMF digits are not going through. > Which results 3001 is not able to login to VM with PIN. The same > problem is seen between CME (E1 PRI) to AA on CUE over PSTN trunk. > Sometimes the voice quality is very bad and unable to hear the unity > announcement. But the DTMF is not working even when the voice quality > is good. > > There is no path code or line code violations are in show controller > output in BR1 and PSTN gw as well. Could someone tell me how to fix > this. > > Thanks, > Prabahar > > ! > network-clock-participate slot 2 > network-clock-select 4 T1 2/1 > ! > controller T1 2/1 > framing esf > linecode b8zs > pri-group timeslots 1-6,24 service mgcp > ! > interface Serial2/1:23 > no ip address > encapsulation hdlc > isdn switch-type primary-ni > isdn incoming-voice voice > isdn bind-l3 ccm-manager > isdn outgoing display-ie > no cdp enable > ! > dial-peer voice 2600 pots > destination-pattern 2600 > port 2/1:23 > forward-digits all > prefix 1408102 > ! > dial-peer voice 11 pots > service mgcpapp > port 2/1:23 > ! > dial-peer voice 12 pots > incoming called-number . > direct-inward-dial > port 2/1:23 > > BR1#sh controllers t1 2/1 brief > T1 2/1 is up. > Applique type is Channelized T1 > Cablelength is long gain36 0db > No alarms detected. > alarm-trigger is not set > Soaking time: 3, Clearance time: 10 > AIS State:Clear LOS State:Clear LOF State:Clear > Version info Firmware: 20050620, FPGA: 20, spm_count = 0 > Framing is ESF, Line Code is B8ZS, Clock Source is Line. > CRC Threshold is 320. Reported from firmware is 320. > Data in current interval (554 seconds elapsed): > 0 Line Code Violations, 0 Path Code Violations > 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins > 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs > Total Data (last 54 15 minute intervals): > 0 Line Code Violations, 0 Path Code Violations, > 0 Slip Secs, 0 Fr Loss Secs, 0 Line Err Secs, 0 Degraded Mins, > 0 Errored Secs, 0 Bursty Err Secs, 0 Severely Err Secs, 0 Unavail Secs > BR1# > > >
