Hi, I am running through Lab 1A and setup CUCME using the telephony-service setup wizard.
It looked like my BR2 SCCP phone registered and then un-registered immediately afterwards. Jun 10 13:45:52.376: %IPPHONE-6-REG_ALARM: 16: Name=SEP001BD4C6C136 Load=8.0(5.0) Last=CM-NAKed Jun 10 13:45:52.376: %IPPHONE-6-REGISTER_NEW: ephone-1:SEP001BD4C6C136 IP:10.10.202.51 Socket:1 DeviceType:Phone has registered. Jun 10 13:45:53.008: %IPPHONE-6-UNREGISTER_NORMAL: ephone-1:SEP001BD4C6C136 IP:10.10.202.51 Socket:1 DeviceType:Phone has unregistered normally. Now when I run the setup command again after clearing the config I dont see this registration happen again. BR2-RTR#sh ephone reg No ephone in specified type/condition. The phone is picking up an IP from my DHCP scope which has been defined as: ip dhcp pool BR2 network 10.10.202.0 255.255.255.0 option 150 ip 10.10.110.3 default-router 10.10.202.1 BR2-RTR#sh ip dhcp bind Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 10.10.202.51 0100.1bd4.c6c1.36 Jun 11 2009 04:32 PM Automatic What is the best way to debug this to find out whats going on. Thanks, Jo