I would use ³debug tftp events² for further clues. You will probably see one or more files misssing.
-- Vik Malhi CCIE #13890, CCSI #31584 Senior Technical Instructor - IPexpert, Inc. Telephone: +1.810.326.1444 Fax: +1.810.454.0130 Mailto: vma...@ipexpert.com Join our free online support and peer group communities: http://www.IPexpert.com/communities IPexpert - The Global Leader in Self-Study, Classroom-Based, Video-On-Demand and Audio Certification Training Tools for the Cisco CCIE R&S Lab, CCIE Security Lab, CCIE Service Provider Lab , CCIE Voice Lab and CCIE Storage Lab Certifications. From: Jo Knight <jokni...@gmail.com> Date: Wed, 10 Jun 2009 17:33:22 +0300 To: OSL Group <ccie_voice@onlinestudylist.com> Subject: [OSL | CCIE_Voice] v3 Lab 1A BR2 CUCME phone registration Hi, I am running through Lab 1A and setup CUCME using the telephony-service setup wizard. It looked like my BR2 SCCP phone registered and then un-registered immediately afterwards. Jun 10 13:45:52.376: %IPPHONE-6-REG_ALARM: 16: Name=SEP001BD4C6C136 Load=8.0(5.0) Last=CM-NAKed Jun 10 13:45:52.376: %IPPHONE-6-REGISTER_NEW: ephone-1:SEP001BD4C6C136 IP:10.10.202.51 Socket:1 DeviceType:Phone has registered. Jun 10 13:45:53.008: %IPPHONE-6-UNREGISTER_NORMAL: ephone-1:SEP001BD4C6C136 IP:10.10.202.51 Socket:1 DeviceType:Phone has unregistered normally. Now when I run the setup command again after clearing the config I dont see this registration happen again. BR2-RTR#sh ephone reg No ephone in specified type/condition. The phone is picking up an IP from my DHCP scope which has been defined as: ip dhcp pool BR2 network 10.10.202.0 255.255.255.0 option 150 ip 10.10.110.3 default-router 10.10.202.1 BR2-RTR#sh ip dhcp bind Bindings from all pools not associated with VRF: IP address Client-ID/ Lease expiration Type Hardware address/ User name 10.10.202.51 0100.1bd4.c6c1.36 Jun 11 2009 04:32 PM Automatic What is the best way to debug this to find out whats going on. Thanks, Jo
