Hey Gang,
I am having some trouble with getting the Br2 SCCP phone to register
after I go through the telephony-service setup and configure
everything according to section 1.8 of Lab1A. A debug ephone register
doesn't return anything. I have reset and restarted the phone to no
success. Anyone have any ideas on what else I can check to figure this
out?
Here's a copy of the telephony-service config:
BR2-RTR#sh run | sec tele
telephony-service
em logout 0:0 0:0 0:0
max-ephones 1
max-dn 1
ip source-address 10.10.110.3 port 2000
auto assign 1 to 1
network-locale ES
network-locale 1 ES
network-locale 2 ES
network-locale 3 ES
network-locale 4 ES
load 7960-7940 P003-08-9-00
max-conferences 8 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Jun 19 2009 00:12:38
BR2-RTR#sh run | sec ephone
max-ephones 1
ephone-dn 1 dual-line
number 3001
ephone 1
no phone-ui speeddial-fastdial
no multicast-moh
mac-address 001B.D4C6.C136
keepalive 30 auxiliary 0
codec g729r8 pre-ietf
type 7960
button 1:1
BR2-RTR#
