I only bounced HQ serial interface and it came good! Took me ages to figure this out...
From: Michael Ciarfello [mailto:[email protected]] Sent: Thursday, 25 June 2009 11:33 PM To: Aamir Panjwani; OSL Group Subject: RE: [OSL | CCIE_Voice] FRTS and MLP issue I've heard of that with virtual-templates. Did you have to do both sides of the connection? From: [email protected] [mailto:[email protected]] On Behalf Of Aamir Panjwani Sent: Thursday, June 25, 2009 3:33 AM To: OSL Group Subject: Re: [OSL | CCIE_Voice] FRTS and MLP issue Nevermind guys, I had to bounce the physical serial interface to get the WAN going From: [email protected] [mailto:[email protected]] On Behalf Of Aamir Panjwani Sent: Thursday, 25 June 2009 12:59 PM To: OSL Group Subject: [OSL | CCIE_Voice] FRTS and MLP issue I have just configured MLP between HQ and BR2 and now my WAN link is not coming back up. I have pretty much followed the WAN QOS exercise video by Vik. Any help would be much appreciated HQ config ***************** class-map match-any media match ip dscp ef class-map match-any signal match ip dscp cs3 match ip dscp af31 policy-map wan-edge class media priority percent 33 class signal bandwidth percent 5 class class-default fair-queue interface serial0/2/0 frame-relay traffic-shaping interface serial0/2/0.2 point-to-point frame-relay interface-dlci 202 ppp virtual-template100 class FRTS interface virtual-template100 bandwidth 768 ip address 142.212.65.1 255.255.255.252 ip ospf mtu-ignore ip pim dense-mode ppp multilink ppp multilink interleave ppp multilink fragment-delay 10 service-policy output wan-edge map-class frame-relay FRTS frame-relay cir 768000 frame-relay mincir 768000 frame-relay bc 7680 frame-relay be 0 BR2 config **************** class-map match-any media match ip dscp ef class-map match-any signal match ip dscp cs3 match ip dscp af31 policy-map wan-edge class media priority percent 33 class signal bandwidth percent 5 class class-default fair-queue interface serial0/2/0 frame-relay traffic-shaping interface serial0/2/0.1 point-to-point frame-relay interface-dlci 102 ppp virtual-template200 class FRTS interface virtual-template200 bandwidth 768 ip address 142.212.65.2 255.255.255.252 ip ospf mtu-ignore ip pim dense-mode ppp multilink ppp multilink interleave ppp multilink fragment-delay 10 service-policy output wan-edge map-class frame-relay FRTS frame-relay cir 768000 frame-relay mincir 768000 frame-relay bc 7680 frame-relay be 0 ************************** Sh ip int brie Virtual-Access1 unassigned YES unset down down Virtual-Access2 unassigned YES TFTP down down Virtual-Access3 142.212.65.1 YES TFTP up down Virtual-Access4 unassigned YES TFTP down down Virtual-Template100 142.212.65.1 YES manual down down ************ Sh frame-relay pvc 202 PVC Statistics for interface Serial0/2/0 (Frame Relay DTE) DLCI = 202, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/2/0.2 input pkts 16 output pkts 225 in bytes 5536 out bytes 12320 dropped pkts 0 in pkts dropped 0 out pkts dropped 0 out bytes dropped 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 19 out bcast bytes 6346 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec pvc create time 00:16:54, last time pvc status changed 00:16:54 Bound to Virtual-Access3 (down, cloned from Virtual-Template100) cir 768000 bc 7680 be 0 byte limit 960 interval 10 mincir 768000 byte increment 960 Adaptive Shaping none pkts 225 bytes 12320 pkts delayed 0 bytes delayed 0 shaping inactive traffic shaping drops 0 Queueing strategy: fifo Output queue 0/40, 0 drop, 0 dequeued ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
