yep auto qos is good for FRF12 and MLP but what about class based
shaping and VATS we can't do auto qos right?

 

Also, do you enable auto qos on all 3 routers or only on HQ? 

 

Thanks

 

From: Michael Ciarfello [mailto:[email protected]] 
Sent: Friday, 26 June 2009 1:35 PM
To: Aamir Panjwani; OSL Group
Subject: RE: [OSL | CCIE_Voice] FRTS and MLP issue

 

I've heard you might need to do both sides. SO prepare for that.

If you do the autoqos (which I usually do) it will take care of that for
you.  Autoqos, copy, paste to notepad, edit, paste back in.  I don't
remember running into having to shut / no shut interfaces, but a good
reminder.  Thanks.

________________________________

From: Aamir Panjwani [[email protected]]
Sent: Thursday, June 25, 2009 9:38 AM
To: Michael Ciarfello; OSL Group
Subject: RE: [OSL | CCIE_Voice] FRTS and MLP issue

I only bounced HQ serial interface and it came good! Took me ages to
figure this out...

 

From: Michael Ciarfello [mailto:[email protected]] 
Sent: Thursday, 25 June 2009 11:33 PM
To: Aamir Panjwani; OSL Group
Subject: RE: [OSL | CCIE_Voice] FRTS and MLP issue

 

I've heard of that with virtual-templates.  Did you have to do both
sides of the connection?

 

 

From: [email protected]
[mailto:[email protected]] On Behalf Of Aamir
Panjwani
Sent: Thursday, June 25, 2009 3:33 AM
To: OSL Group
Subject: Re: [OSL | CCIE_Voice] FRTS and MLP issue

 

Nevermind guys, I had to bounce the physical serial interface to get the
WAN going

 

 

 

From: [email protected]
[mailto:[email protected]] On Behalf Of Aamir
Panjwani
Sent: Thursday, 25 June 2009 12:59 PM
To: OSL Group
Subject: [OSL | CCIE_Voice] FRTS and MLP issue

 

 

I have just configured MLP between HQ and BR2 and now my WAN link is not
coming back up. I have pretty much followed the WAN QOS exercise video
by Vik. 

 

Any help would be much appreciated

 

HQ config

*****************

class-map match-any media

match ip dscp ef

class-map match-any signal

match ip dscp cs3

match ip dscp af31

 

policy-map wan-edge

class media

priority percent 33

class signal

bandwidth percent 5

class class-default

fair-queue

 

interface serial0/2/0

frame-relay traffic-shaping

 

interface serial0/2/0.2 point-to-point

frame-relay interface-dlci 202 ppp virtual-template100

class FRTS

 

interface virtual-template100

bandwidth 768

ip address 142.212.65.1 255.255.255.252

ip ospf mtu-ignore

ip pim dense-mode

ppp multilink

ppp multilink interleave

ppp multilink fragment-delay 10

service-policy output wan-edge

 

map-class frame-relay FRTS

frame-relay cir 768000

frame-relay mincir 768000

frame-relay bc 7680

frame-relay be 0

 

BR2 config

****************

class-map match-any media

match ip dscp ef

class-map match-any signal

match ip dscp cs3

match ip dscp af31

 

policy-map wan-edge

class media

priority percent 33

class signal

bandwidth percent 5

class class-default

fair-queue

 

interface serial0/2/0

frame-relay traffic-shaping

 

interface serial0/2/0.1 point-to-point

frame-relay interface-dlci 102 ppp virtual-template200

class FRTS

 

interface virtual-template200

bandwidth 768

ip address 142.212.65.2 255.255.255.252

ip ospf mtu-ignore

ip pim dense-mode

ppp multilink

ppp multilink interleave

ppp multilink fragment-delay 10

service-policy output wan-edge

 

map-class frame-relay FRTS

frame-relay cir 768000

frame-relay mincir 768000

frame-relay bc 7680

frame-relay be 0

 

**************************

 

Sh ip int brie

 

Virtual-Access1                   unassigned      YES unset  down
down    

Virtual-Access2                 unassigned         YES TFTP   down
down    

Virtual-Access3                142.212.65.1        YES TFTP   up
down    

Virtual-Access4                 unassigned         YES TFTP   down
down    

Virtual-Template100        142.212.65.1    YES manual down
down

 

************

 

Sh frame-relay pvc 202

 

PVC Statistics for interface Serial0/2/0 (Frame Relay DTE)

 

DLCI = 202, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE =
Serial0/2/0.2

 

  input pkts 16            output pkts 225          in bytes 5536      

  out bytes 12320          dropped pkts 0           in pkts dropped 0


  out pkts dropped 0                out bytes dropped 0         

  in FECN pkts 0           in BECN pkts 0           out FECN pkts 0


  out BECN pkts 0          in DE pkts 0             out DE pkts 0


  out bcast pkts 19        out bcast bytes 6346      

  5 minute input rate 0 bits/sec, 0 packets/sec

  5 minute output rate 0 bits/sec, 0 packets/sec

  pvc create time 00:16:54, last time pvc status changed 00:16:54

  Bound to Virtual-Access3 (down, cloned from Virtual-Template100)

  cir 768000    bc 7680      be 0         byte limit 960    interval 10


  mincir 768000    byte increment 960   Adaptive Shaping none

  pkts 225       bytes 12320     pkts delayed 0         bytes delayed 0


  shaping inactive    

  traffic shaping drops 0

  Queueing strategy: fifo

  Output queue 0/40, 0 drop, 0 dequeued

 


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Reply via email to