Regular SRST... Cisco says MWI is supported, but no doco on how. J
On Tue, Aug 11, 2009 at 8:39 PM, Aamir Panjwani<aamir.panjw...@ivision.com.au> wrote: > There are two types of SRST. Normal SRST (unified SRST) and CME SRST. > > My config was for CME SRST which will kick in when remote site lose > connectivity to HQ CUCM. > > Let me know which SRST method are you trying to configure? > > > > -----Original Message----- > From: Jonathan Charles [mailto:jonv...@gmail.com] > Sent: Wednesday, 12 August 2009 11:30 AM > To: Aamir Panjwani > Cc: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] CUE in SRST... > > That is not SRST config.... > > That is CCME config. > > Jonathan > > On Tue, Aug 11, 2009 at 6:38 PM, Aamir > Panjwani<aamir.panjw...@ivision.com.au> wrote: >> Jonathan, MWI is now working for me in CME SRST mode..please see my >> config below >> >> CME config >> >> telephony-service >> srst mode auto-provision none >> srst ephone description CME fallback : Aug 07 2009 07:17:08 >> srst dn template 1 >> srst dn line-mode octo >> max-ephones 5 >> max-dn 10 >> ip source-address 142.102.66.1 port 2000 >> time-zone 42 >> voicemail 3050 >> mwi relay >> max-conferences 8 gain -6 >> call-forward pattern .T >> transfer-system full-consult >> create cnf-files version-stamp 7960 Aug 11 2009 22:35:35 >> >> ephone-dn-template 1 >> call-forward busy 3050 >> call-forward noan 3050 timeout 10 >> mwi sip >> >> sip-ua >> mwi-server ipv4:142.102.66.253 expires 3600 port 5060 transport udp >> >> CUE config >> >> ccn subsystem sip >> gateway address "142.102.66.1" >> mwi sip sub-notify >> end subsystem >> >> one thing I notice that unless you do "create cnf-files" after every >> little change under telephone-service, you might see some really weird >> and unexpected behavior >> >> Thanks >> >> >> >> -----Original Message----- >> From: Jonathan Charles [mailto:jonv...@gmail.com] >> Sent: Tuesday, 11 August 2009 9:41 AM >> To: Aamir Panjwani >> Cc: ccie_voice@onlinestudylist.com >> Subject: Re: [OSL | CCIE_Voice] CUE in SRST... >> >> Nope. >> >> On Mon, Aug 10, 2009 at 8:12 AM, Aamir >> Panjwani<aamir.panjw...@ivision.com.au> wrote: >>> Jonathan, did you manage to figure this out? >>> >>> >>> >>> -----Original Message----- >>> From: ccie_voice-boun...@onlinestudylist.com >>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Jonathan >>> Charles >>> Sent: Sunday, 9 August 2009 8:00 AM >>> To: ccie_voice@onlinestudylist.com >>> Subject: [OSL | CCIE_Voice] CUE in SRST... >>> >>> I posted this to other groups without adequate response... >>> >>> So, I have a customer who wants to put in a CUE at every remote site >>> for VM, but use CUCM for call processing (so the CUE would work in >>> SRST, but be connected to CUCM via JTAPI). >>> >>> We have demo gear from Cisco and we have the CUE7 working with CCM7, >>> in SRST, we have most functionality, but MWI does not work... (in ccm >>> mode, everything works...) >>> >>> I have found lots of documentation saying it is supported, but none >>> saying how to do it... >>> >>> From the SRND: >>> >>> "Although MWI changes are not supported in SRST mode with previous >>> releases of Cisco Unity Express, voice messages can be sent and >>> retrieved as during normal operation, but the MWI lamp state on the >>> phone remains unchanged until the phone registers again with Unified >>> CM. At that time, all MWI lamp states are automatically resynchronized >>> with the current state of the users' Cisco Unity Express voicemail >>> boxes. Cisco Unity Express 3.0 and later releases support MWI for SRST >>> mode" >>> >>> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/6x/unityx.html >>> >>> Anyone see this work? >>> >>> >>> Jonathan >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, >>> please visit www.ipexpert.com >>> >>> ______________________________________________________________________ >>> This email has been scanned by the MessageLabs Email Security System. >>> For more information please visit http://www.messagelabs.com/email >>> ______________________________________________________________________ >>> >>> ______________________________________________________________________ >>> This email has been scanned by the MessageLabs Email Security System. >>> For more information please visit http://www.messagelabs.com/email >>> ______________________________________________________________________ >>> >> >> ______________________________________________________________________ >> This email has been scanned by the MessageLabs Email Security System. >> For more information please visit http://www.messagelabs.com/email >> ______________________________________________________________________ >> >> ______________________________________________________________________ >> This email has been scanned by the MessageLabs Email Security System. >> For more information please visit http://www.messagelabs.com/email >> ______________________________________________________________________ >> > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ > > ______________________________________________________________________ > This email has been scanned by the MessageLabs Email Security System. > For more information please visit http://www.messagelabs.com/email > ______________________________________________________________________ > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
