Thanks. That has already been done. Did you get it to work as the question wanted (supp services and everything?)
From: Aamir Panjwani [mailto:[email protected]] Sent: Monday, September 14, 2009 1:07 AM To: Michael Ciarfello; [email protected] Subject: RE: [OSL | CCIE_Voice] Volume2 Lab1 Q4.2 and 4.3 (Gatekeeper) For your last problem, try enabling "inbound fast start" on the GK trunk in CUCM, if you have CME added as H323 gateway in CUCM then you will need to enable "inbound fast start" on h323 gateway not on GK trunk HTH Thanks From: [email protected] [mailto:[email protected]] On Behalf Of Michael Ciarfello Sent: Monday, 14 September 2009 2:59 PM To: [email protected] Subject: [OSL | CCIE_Voice] Volume2 Lab1 Q4.2 and 4.3 (Gatekeeper) I can't seem to get these questions configured correctly as the PG suggests. Anyone get it to work? In Q4.2, supplimental services doesn't work unless I add an MTP in. Since you want G729, I had to add a g729 SW MTP in the HQ IOS and register it to CCM. That works. But then calls from CCME SIP to CCM (SIP or SCCP) don't work properly. CCME SCCP to CCM SCCP or SIP work with supp services. Forgetting about supplimental services and putting the config back the way the PG has, the BR2 SIP phone can't call the HQ SCCP or SIP Phone. They ring, but hang up when answer. Thanks ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
