Any help/suggestion is appreciated.
thanks
________________________________
From: akash patel <akashapa...@yahoo.com>
To: ccie_voice@onlinestudylist.com
Sent: Mon, October 26, 2009 3:54:15 PM
Subject: Issue connecting 7961 phones to proctor lab using soft vpn client .
I tried to connect two 7961 phones as per this article from CCIE Blog
http://blog.ipexpert.com/2009/06/22/hardware-phones-with-software-vpn-and-the-future-of-ccie-voice-v3-product-development/
so basically I had connected to Proctorlab using Cisco Soft Client using my
Wirless interface: 192.168.1.1. I enabled ICS on this interface.
I configured static interface '192.168.0.1' and then connect phones back to
back using power cube. On one phone I assigned 192.168.0.5 /24 with default
route 192.168.0.1, tftp- 10.10.110.3 and on 2nd phone 192.168.0.6/24, tftp
10.10.210.10.
However I could not register this phone with UCM or CME; i made sure Mac id and
phone types were setup correct on UCM & CME. I captured packets on ethernet
port using wireshark, but did not see any packet.
Does anyone else had similar issue and if yes can you please share some
guidance?
Thank you
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
