The reg patch contains the additions you are adding manually so it does not matter if you do it manually or use the .reg patch (file)
Bericht verzonden vanaf iPhone. Message sent from iPhone. Met vriendelijke groet, ing. Iwan Hoogendoorn CCIE# 13084 (R&S / SP / Security) On 30 okt 2009, at 14:55, "Pulos, Greg" <gpu...@doc.gov> wrote: > No special reg patch needed but you do need some reg entries which > are as follows: > > KEY - Hkey_local_machine/software/Cisco Systems/Model > String Value - Hardware 7835H04 > String Value - Memory 2048 > String Value - Speed 3400 > > 1) install windows 2003 server (any ver, not MCS disk) > 2) put above entries into registry after server install > 3) install MCS winOS disk or download install from cco > 4) install CRS > > Note: you need physical 2048mb memory but not 7835 or 3400 speed. > > greg > > > -----Original Message----- > From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice- > boun...@onlinestudylist.com] On Behalf Of Iwan > Sent: Friday, October 30, 2009 6:59 AM > To: 'Jeff Garvas'; OSL Group > Subject: Re: [OSL | CCIE_Voice] Cisco Telephony OS / VMWare ESXi > > Jeff, > > > > What are you trying to install exactly? > > I used The Cisco OS (cisco iptelephony server os2003.1.4) which I > used to install UCCX. > > I know that all the versions below 1.4 are not Vmware aware and you > need a special .reg patch for this. > > > > This can be found here: > > http://tannerezell.com/cisco/?p=164 <http://tannerezell.com/cisco/?p=164 > > > > > > > > ing. Iwan Hoogendoorn > > CCIE3#13084 > > > > Van: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice- > boun...@onlinestudylist.com] Namens Jeff Garvas > Verzonden: vrijdag 30 oktober 2009 7:05 > Aan: OSL Group > Onderwerp: [OSL | CCIE_Voice] Cisco Telephony OS / VMWare ESXi > > > > > I think I'm missing something obvious but I can't find anything with > google that gives this one away. Has anyone successfully loaded > Cisco Telephony OS for uccx in vmware ESXi without installing it on > an actual MCS server first and creating a image? I'm using the HP > 2003.1.1 disk, but I'm installing on a simple Intel CPU box. > > I built a 80gb partition, 3.7gb of memory, and I keep getting this > error early in the install: "The installation program has > determined that this server is not supported by this media" > > What is the best way to install the OS on a generic ESXi machine? > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
