Would the below method not break Number globalization?? ( in a world dial-plan) Would it not be easier to do the appending at the gateway level or even the Device Pool level and then do all you Localization with Calling Number translations??
On Mon, Nov 9, 2009 at 3:16 PM, Vccie Vccie <[email protected]> wrote: > Would the below method not break Number globalization?? ( in a world > dial-plan) Would it not be easier to do the appending at the gateway > level?? > > > On Mon, Nov 9, 2009 at 1:38 PM, Berry, Matthew J. < > [email protected]> wrote: > >> Below is the easiest method I have found to append a 9 to incoming calls >> thus making callbacks much easier. >> >> >> >> ** Note: Changing this service parameter on one subscriber will affect the >> entire cluster. ** >> >> >> >> SYSTEM >> SERVICE PARAMETERS >> Cisco CallManager >> Select Advanced >> >> >> >> Under “Clusterwide Parameters (Device Phone),” look for “Incoming Calling >> Party National Number Prefix – Phone.” I added a 91. >> >> >> >> Additionally, I also enabled “Insert Hyphens in 12-Digit Numbers Required >> Field” to make numbers much easier to reader. >> >> >> >> Thanks, >> >> * * >> >> *Matthew Berry* >> >> Office 952 516 3748 | Mobile 952 221 2814| >> [email protected]<[email protected]> >> >> >> >> *From:* Christopher Clouse [mailto:[email protected]] >> *Sent:* Monday, November 09, 2009 11:34 AM >> *To:* Berry, Matthew J. >> *Subject:* Re: [OSL | CCIE_Voice] Appending a 9 to inbound calls >> >> >> >> Check out the service parameters. There is a prefix digits setting in >> there. I don't have a CM in front of me to tell you which one right now, >> but there is a group, 1 for local, 1 for national and 1 for international. >> >> >> >> ~Chris >> >> >> >> *From:* Berry, Matthew J. <[email protected]> >> >> *Sent:* Monday, November 09, 2009 11:32 AM >> >> *To:* [email protected] >> >> *Subject:* [OSL | CCIE_Voice] Appending a 9 to inbound calls >> >> >> >> Hey guys! >> >> >> >> Alright, now for a practical question. In our environment, incoming calls >> display the ten-digit CID. How could I append a 9 to all incoming numbers >> so that users can return calls using the “Received Calls” or “Missed Calls” >> section in directories? >> >> >> >> I tried to add a 9 prefix to the PRIs, but that did not work. I received >> weird carrier messages. >> >> >> >> Any suggestions? >> >> >> >> Thanks, >> >> * * >> >> *Matthew Berry*, Sr. Unified Communications Engineer, CCVP >> >> Kroll Ontrack | 9023 Columbine Road, Eden Prairie, MN 55347 >> >> 952 516 3748 | Fax 952 562 2175 | Mobile 952 221 2814| >> [email protected] <[email protected]> >> www.krollontrack.com >> >> >> ------------------------------ >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
