Hi Robert, I have the same problem and I realised that it was due to transcoder problem. Some how, the transcoder of CUBE does not invoke in the call. You can check by the command: "show dspfarm all" on HQ_RT when the call's happening.
In theory, when the call come from UCM to CUBE, CUBE will take over that call and make a call to CME by itself. Meaning that the CUBE should be an terminal endpoint requiring a termination resource. So far, I still can not make the transcoder in CUBE work when the call comes. On Sun, Nov 29, 2009 at 9:43 AM, Robert McGhee <[email protected]>wrote: > > > > > Hi All, > > > > I’ve got some weirdness with CUBE where the HQ phone calls the > (CME) BR phone and gets ringback, the BR phone answers the call and is > immediately put on hold and the HQ phone continues to hear ringback. Here’s > the config and debug info: > > * * > > *Debug voice ipipgw:* > > Nov 28 23:23:50.902: //45/804C6B140200/H323/setup_ind: Receive bearer cap > infoXRate 16, rateMult 0 > > Nov 28 23:23:50.910: > //45/804C6B140200/H323/cch323_set_h245_state_mc_mode_incoming: h245 state > m/c mode=0x10F, h323_ctl=0x2F > > Nov 28 23:23:50.922: //-1/xxxxxxxxxxxx/H323/cch245_event_handler: callID=45 > > Nov 28 23:23:50.922: //-1/xxxxxxxxxxxx/H323/cch245_event_handler: Event > CC_EV_H245_SET_MODE: data ptr=0x4CDB95B0 > > Nov 28 23:23:50.922: //45/804C6B140200/H323/cch323_set_mode: callID=45, > flow Mode=2 spi_mode=0x1 > > Nov 28 23:23:50.922: //45/804C6B140200/H323/cch323_do_call_proceeding: > set_mode NOT called yet...saved deferred CALL_PROC > > Nov 28 23:23:50.922: //-1/xxxxxxxxxxxx/H323/cch323_get_dp_pref_mask: > > cch323_get_dp_pref_mask:IPIPGW(46):setting mask for 729ar8also as 729 is > configured > > Nov 28 23:23:50.922: > //46/804C6B140200/H323/cch323_set_h245_state_mc_mode_outgoing: call_spi_mode > = 1 > > Nov 28 23:23:50.922: > //46/804C6B140200/H323/cch323_set_h245_state_mc_mode_outgoing: h245 state > m/c mode=0x1AF0, h323_ctl=0x0 > > Nov 28 23:23:50.922: //46/804C6B140200/H323/cch323_get_peer_info: Entry > > Nov 28 23:23:50.922: //46/804C6B140200/H323/cch323_get_peer_info: Have peer > > Nov 28 23:23:50.922: //46/804C6B140200/H323/cch323_set_pref_codec_list: > First preferred codec(bytes)=16(20) > > Nov 28 23:23:50.922: //46/804C6B140200/H323/cch323_get_peer_info: Flow Mode > set to FLOW_AROUND > > Nov 28 23:23:50.922: > //46/804C6B140200/H323/cch323_set_h323_control_options_outgoing: h245 sm > mode = 6896 > > Nov 28 23:23:50.922: > //46/804C6B140200/H323/cch323_set_h323_control_options_outgoing: > h323_ctl=0x2F > > Nov 28 23:23:50.926: //45/804C6B140200/H323/cch323_process_set_mode: > Setting inbound leg mode flags to 0x1AF0, flow-mode to FLOW_AROUND > > Nov 28 23:23:50.926: //45/804C6B140200/H323/cch323_process_set_mode: > Sending deferred CALL_PROC > > Nov 28 23:23:50.926: //45/804C6B140200/H323/cch323_do_call_proceeding: > set_mode called so we can proceed with CALLPROC > > Nov 28 23:23:50.934: //46/804C6B140200/H323/cch323_rotary_call_notify: > > cch323_rotary_call_notify Posting rotary call notification to other > callleg. > > > > Nov 28 23:23:50.934: //-1/xxxxxxxxxxxx/H323/cch245_event_handler: callID=45 > > Nov 28 23:23:50.934: //45/804C6B140200/H323/cch323_do_rotary_call_cleanup: > ../voip/cch323/gw/os/src/h323_gw_ccapi.c:cch323_do_rotary_call_cleanup:7445: > Entry > > Nov 28 23:23:50.934: //45/804C6B140200/H323/cch323_do_rotary_call_cleanup: > cch323_do_rotary_call_cleanup Exit > > Nov 28 23:23:50.934: //46/804C6B140200/H323/check_qos_and_send_setup: > Sending setup h323 slow rsvp > > Nov 28 23:23:50.934: //46/804C6B140200/H323/cch323_build_qosInfo: > ccb=0x49615B80. msg_type=1 > > Nov 28 23:23:50.934: //46/804C6B140200/H323/cch323_build_qosInfo: > media_ip_addr=0x0, remote_qos_video=0, audio_lport=0, audio_rport=0, > video=0, video_lport=0, video_rport=0, h245_lport=0, h245_rport=0, > remote_qos_audio_bw=0, remote_qos_video_bw=0 > > Nov 28 23:23:51.014: //-1/xxxxxxxxxxxx/H323/cch323_decode_qos_info: > media_ip_addr: 0x0, remote_qos_video: 0, audio_lport: 0, audio_rport: 0, > video: 0, video_lport: 0, video_rport: 0, remote qos audio bw: 0, remote qos > video bw: 0 > > Nov 28 23:23:51.014: //46/804C6B140200/H323/callproc_notify: Peer not ready > so not starting TCP > > Nov 28 23:23:51.014: //46/804C6B140200/H323/callproc_notify: Peer not ready > so not starting TCP > > Nov 28 23:23:52.570: //46/804C6B140200/H323/h245_address_ind: ev=2 > > Nov 28 23:23:52.570: //-1/xxxxxxxxxxxx/H323/h245_address_ind: Sending event > > Nov 28 23:23:52.570: //46/804C6B140200/H323/cch323_h245_addr_notify: > Sending event CC_EV_H245_ADDR, ev 2 > > Nov 28 23:23:52.570: //-1/xxxxxxxxxxxx/H323/cch245_event_handler: callID=45 > > Nov 28 23:23:52.570: //-1/xxxxxxxxxxxx/H323/cch245_event_handler: Event > CC_EV_H245_ADDR received, ADDR event 2 > > Nov 28 23:23:52.570: //-1/xxxxxxxxxxxx/H323/cch323_start_h245: entry > > Nov 28 23:23:52.574: //45/804C6B140200/H323/cch323_h245_connection_sm: > state=0, event=0, ccb=4B1A0AD4, listen state=0 > > Nov 28 23:23:52.574: //45/804C6B140200/H323/cch323_start_h245: Sending > Progress[pi=8] to CCM > > Nov 28 23:23:52.574: //45/804C6B140200/H323/cch323_start_h245: Sending > Progress[h245Addr, pi=0x00] > > Nov 28 23:23:52.586: //45/804C6B140200/H323/cch323_h245_connection_sm: > state=1, event=2, ccb=4B1A0AD4, listen state=1 > > Nov 28 23:24:00.498: //45/804C6B140200/H323/cch323_h245_connection_sm: > state=0, event=4, ccb=4B1A0AD4, listen state=2 > > Nov 28 23:24:00.518: //45/804C6B140200/H323/cch323_h245_connection_sm: > state=0, event=4, ccb=4B1A0AD4, listen state=0 > > > > > > > > *Show gatekeeper call:* > > > > HQ-Gatekeeper#sho gatek call > > Total number of active calls = 2. > > GATEKEEPER CALL INFO > > ==================== > > LocalCallID Age(secs) BW > > 17-32884 5 128(Kbps) > > Endpt(s): Alias E.164Addr > > src EP: trunk_1 1001 > > CallSignalAddr Port RASSignalAddr Port > > 10.0.100.2 35818 10.0.100.2 32807 > > Endpt(s): Alias E.164Addr > > dst EP: CUBE 2001 > > CallSignalAddr Port RASSignalAddr Port > > 10.0.100.1 1720 10.0.100.1 59350 > > LocalCallID Age(secs) BW > > 18-32884 5 16(Kbps) > > Endpt(s): Alias E.164Addr > > src EP: CUBE 1001 > > CallSignalAddr Port RASSignalAddr Port > > 10.0.100.1 1720 10.0.100.1 59350 > > Endpt(s): Alias E.164Addr > > dst EP: cme 2001 > > CallSignalAddr Port RASSignalAddr Port > > 10.0.200.2 1720 10.0.200.2 51089 > > > > > > *HQ Configuration:* > > > > interface FastEthernet0/0 > > ip address 10.0.100.1 255.255.255.0 > > ip nbar protocol-discovery > > duplex full > > speed 100 > > h323-gateway voip interface > > h323-gateway voip id VIA ipaddr 10.0.100.1 1719 > > h323-gateway voip h323-id CUBE > > > > gatekeeper > > zone local cme lab.com outvia VIA > > zone local cucm lab.com > > zone local VIA lab.com > > zone prefix cme 2... > > gw-type-prefix 1#* default-technology > > no shutdown > > > > telephony-service > > sdspfarm units 2 > > sdspfarm transcode sessions 6 > > sdspfarm tag 1 xcoder > > em logout 0:0 0:0 0:0 > > max-ephones 1 > > max-dn 2 > > ip source-address 10.0.100.1 port 2000 > > max-conferences 8 gain -6 > > transfer-system full-consult > > create cnf-files version-stamp 7960 Nov 28 2009 14:57:02 > > > > > > > > Thanks for any help with this…… > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
