Have you configure the DSPs on cube, SCCP to reg with telephony services? On Sat, Nov 28, 2009 at 6:38 PM, Dao Manh Hieu <[email protected]> wrote:
> Hi Robert, > I have the same problem and I realised that it was due to > transcoder problem. Some how, the transcoder of CUBE does not invoke in the > call. You can check by the command: "show dspfarm all" on HQ_RT when the > call's happening. > > In theory, when the call come from UCM to CUBE, CUBE will take over that > call and make a call to CME by itself. Meaning that the CUBE should be an > terminal endpoint requiring a termination resource. > > So far, I still can not make the transcoder in CUBE work when the call > comes. > On Sun, Nov 29, 2009 at 9:43 AM, Robert McGhee > <[email protected]>wrote: > >> >> >> >> >> Hi All, >> >> >> >> I’ve got some weirdness with CUBE where the HQ phone calls the >> (CME) BR phone and gets ringback, the BR phone answers the call and is >> immediately put on hold and the HQ phone continues to hear ringback. Here’s >> the config and debug info: >> >> * * >> >> *Debug voice ipipgw:* >> >> Nov 28 23:23:50.902: //45/804C6B140200/H323/setup_ind: Receive bearer cap >> infoXRate 16, rateMult 0 >> >> Nov 28 23:23:50.910: >> //45/804C6B140200/H323/cch323_set_h245_state_mc_mode_incoming: h245 state >> m/c mode=0x10F, h323_ctl=0x2F >> >> Nov 28 23:23:50.922: //-1/xxxxxxxxxxxx/H323/cch245_event_handler: >> callID=45 >> >> Nov 28 23:23:50.922: //-1/xxxxxxxxxxxx/H323/cch245_event_handler: Event >> CC_EV_H245_SET_MODE: data ptr=0x4CDB95B0 >> >> Nov 28 23:23:50.922: //45/804C6B140200/H323/cch323_set_mode: callID=45, >> flow Mode=2 spi_mode=0x1 >> >> Nov 28 23:23:50.922: //45/804C6B140200/H323/cch323_do_call_proceeding: >> set_mode NOT called yet...saved deferred CALL_PROC >> >> Nov 28 23:23:50.922: //-1/xxxxxxxxxxxx/H323/cch323_get_dp_pref_mask: >> >> cch323_get_dp_pref_mask:IPIPGW(46):setting mask for 729ar8also as 729 is >> configured >> >> Nov 28 23:23:50.922: >> //46/804C6B140200/H323/cch323_set_h245_state_mc_mode_outgoing: call_spi_mode >> = 1 >> >> Nov 28 23:23:50.922: >> //46/804C6B140200/H323/cch323_set_h245_state_mc_mode_outgoing: h245 state >> m/c mode=0x1AF0, h323_ctl=0x0 >> >> Nov 28 23:23:50.922: //46/804C6B140200/H323/cch323_get_peer_info: Entry >> >> Nov 28 23:23:50.922: //46/804C6B140200/H323/cch323_get_peer_info: Have >> peer >> >> Nov 28 23:23:50.922: //46/804C6B140200/H323/cch323_set_pref_codec_list: >> First preferred codec(bytes)=16(20) >> >> Nov 28 23:23:50.922: //46/804C6B140200/H323/cch323_get_peer_info: Flow >> Mode set to FLOW_AROUND >> >> Nov 28 23:23:50.922: >> //46/804C6B140200/H323/cch323_set_h323_control_options_outgoing: h245 sm >> mode = 6896 >> >> Nov 28 23:23:50.922: >> //46/804C6B140200/H323/cch323_set_h323_control_options_outgoing: >> h323_ctl=0x2F >> >> Nov 28 23:23:50.926: //45/804C6B140200/H323/cch323_process_set_mode: >> Setting inbound leg mode flags to 0x1AF0, flow-mode to FLOW_AROUND >> >> Nov 28 23:23:50.926: //45/804C6B140200/H323/cch323_process_set_mode: >> Sending deferred CALL_PROC >> >> Nov 28 23:23:50.926: //45/804C6B140200/H323/cch323_do_call_proceeding: >> set_mode called so we can proceed with CALLPROC >> >> Nov 28 23:23:50.934: //46/804C6B140200/H323/cch323_rotary_call_notify: >> >> cch323_rotary_call_notify Posting rotary call notification to other >> callleg. >> >> >> >> Nov 28 23:23:50.934: //-1/xxxxxxxxxxxx/H323/cch245_event_handler: >> callID=45 >> >> Nov 28 23:23:50.934: //45/804C6B140200/H323/cch323_do_rotary_call_cleanup: >> ../voip/cch323/gw/os/src/h323_gw_ccapi.c:cch323_do_rotary_call_cleanup:7445: >> Entry >> >> Nov 28 23:23:50.934: //45/804C6B140200/H323/cch323_do_rotary_call_cleanup: >> cch323_do_rotary_call_cleanup Exit >> >> Nov 28 23:23:50.934: //46/804C6B140200/H323/check_qos_and_send_setup: >> Sending setup h323 slow rsvp >> >> Nov 28 23:23:50.934: //46/804C6B140200/H323/cch323_build_qosInfo: >> ccb=0x49615B80. msg_type=1 >> >> Nov 28 23:23:50.934: //46/804C6B140200/H323/cch323_build_qosInfo: >> media_ip_addr=0x0, remote_qos_video=0, audio_lport=0, audio_rport=0, >> video=0, video_lport=0, video_rport=0, h245_lport=0, h245_rport=0, >> remote_qos_audio_bw=0, remote_qos_video_bw=0 >> >> Nov 28 23:23:51.014: //-1/xxxxxxxxxxxx/H323/cch323_decode_qos_info: >> media_ip_addr: 0x0, remote_qos_video: 0, audio_lport: 0, audio_rport: 0, >> video: 0, video_lport: 0, video_rport: 0, remote qos audio bw: 0, remote qos >> video bw: 0 >> >> Nov 28 23:23:51.014: //46/804C6B140200/H323/callproc_notify: Peer not >> ready so not starting TCP >> >> Nov 28 23:23:51.014: //46/804C6B140200/H323/callproc_notify: Peer not >> ready so not starting TCP >> >> Nov 28 23:23:52.570: //46/804C6B140200/H323/h245_address_ind: ev=2 >> >> Nov 28 23:23:52.570: //-1/xxxxxxxxxxxx/H323/h245_address_ind: Sending >> event >> >> Nov 28 23:23:52.570: //46/804C6B140200/H323/cch323_h245_addr_notify: >> Sending event CC_EV_H245_ADDR, ev 2 >> >> Nov 28 23:23:52.570: //-1/xxxxxxxxxxxx/H323/cch245_event_handler: >> callID=45 >> >> Nov 28 23:23:52.570: //-1/xxxxxxxxxxxx/H323/cch245_event_handler: Event >> CC_EV_H245_ADDR received, ADDR event 2 >> >> Nov 28 23:23:52.570: //-1/xxxxxxxxxxxx/H323/cch323_start_h245: entry >> >> Nov 28 23:23:52.574: //45/804C6B140200/H323/cch323_h245_connection_sm: >> state=0, event=0, ccb=4B1A0AD4, listen state=0 >> >> Nov 28 23:23:52.574: //45/804C6B140200/H323/cch323_start_h245: Sending >> Progress[pi=8] to CCM >> >> Nov 28 23:23:52.574: //45/804C6B140200/H323/cch323_start_h245: Sending >> Progress[h245Addr, pi=0x00] >> >> Nov 28 23:23:52.586: //45/804C6B140200/H323/cch323_h245_connection_sm: >> state=1, event=2, ccb=4B1A0AD4, listen state=1 >> >> Nov 28 23:24:00.498: //45/804C6B140200/H323/cch323_h245_connection_sm: >> state=0, event=4, ccb=4B1A0AD4, listen state=2 >> >> Nov 28 23:24:00.518: //45/804C6B140200/H323/cch323_h245_connection_sm: >> state=0, event=4, ccb=4B1A0AD4, listen state=0 >> >> >> >> >> >> >> >> *Show gatekeeper call:* >> >> >> >> HQ-Gatekeeper#sho gatek call >> >> Total number of active calls = 2. >> >> GATEKEEPER CALL INFO >> >> ==================== >> >> LocalCallID Age(secs) BW >> >> 17-32884 5 128(Kbps) >> >> Endpt(s): Alias E.164Addr >> >> src EP: trunk_1 1001 >> >> CallSignalAddr Port RASSignalAddr Port >> >> 10.0.100.2 35818 10.0.100.2 32807 >> >> Endpt(s): Alias E.164Addr >> >> dst EP: CUBE 2001 >> >> CallSignalAddr Port RASSignalAddr Port >> >> 10.0.100.1 1720 10.0.100.1 59350 >> >> LocalCallID Age(secs) BW >> >> 18-32884 5 16(Kbps) >> >> Endpt(s): Alias E.164Addr >> >> src EP: CUBE 1001 >> >> CallSignalAddr Port RASSignalAddr Port >> >> 10.0.100.1 1720 10.0.100.1 59350 >> >> Endpt(s): Alias E.164Addr >> >> dst EP: cme 2001 >> >> CallSignalAddr Port RASSignalAddr Port >> >> 10.0.200.2 1720 10.0.200.2 51089 >> >> >> >> >> >> *HQ Configuration:* >> >> >> >> interface FastEthernet0/0 >> >> ip address 10.0.100.1 255.255.255.0 >> >> ip nbar protocol-discovery >> >> duplex full >> >> speed 100 >> >> h323-gateway voip interface >> >> h323-gateway voip id VIA ipaddr 10.0.100.1 1719 >> >> h323-gateway voip h323-id CUBE >> >> >> >> gatekeeper >> >> zone local cme lab.com outvia VIA >> >> zone local cucm lab.com >> >> zone local VIA lab.com >> >> zone prefix cme 2... >> >> gw-type-prefix 1#* default-technology >> >> no shutdown >> >> >> >> telephony-service >> >> sdspfarm units 2 >> >> sdspfarm transcode sessions 6 >> >> sdspfarm tag 1 xcoder >> >> em logout 0:0 0:0 0:0 >> >> max-ephones 1 >> >> max-dn 2 >> >> ip source-address 10.0.100.1 port 2000 >> >> max-conferences 8 gain -6 >> >> transfer-system full-consult >> >> create cnf-files version-stamp 7960 Nov 28 2009 14:57:02 >> >> >> >> >> >> >> >> Thanks for any help with this…… >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- Regards, Talmadge Almand CCIE #20901 (Voice) Sr, Support Engineer - IPexpert, Inc. URL:http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
