Classification: UNCLASSIFIED
Caveats: FOUO

User is able to activate service and log in.  Phone reboots with new
configuration.  However, primary line does not show up on button one,
speed dial shows up on button 2.  Phone gets no dial tone and is unable
to complete calls.

This same question was asked by Vineet Sanghi on July 14, but if it was
solved, the solution was not posted.

Relevant portions of config

Voice logout-profile 1
        Number 3002 type normal

Voice user-profile 1
        Max-idle-time 5
        Pin 1234
        User br2ph3 password cisco
        Number 3102 type normal
        Speed-dial 1 3006 label "3006"

Telephony-service
        Em logout 19:0 23:0 7:0
        url authentication http://10.10.202.1/CCMCIP/authenticate.asp
br2ph3 cisco

ephone 2
        mac-address x.x.x
        type 7961
        logout-profile 1

I have executed a restart all inside of telephony-service.

Jeff

-----------------------------------------------------------
Jeffrey T. Girard ("Jeff")
COL, 53
Future Forces Integration Directorate (FFID), Deputy - Networks
office:  (915)568-1240  DSN 978
Mobile:  (915)727-4222
reply to:  [email protected]


Classification: UNCLASSIFIED
Caveats: FOUO


_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to