Hi Jeff,

Did you create the ephone-dn for 3102?

On Sat, Dec 19, 2009 at 7:27 PM, Girard, Jeffrey COL MIL USA <
[email protected]> wrote:

> Classification: UNCLASSIFIED
> Caveats: FOUO
>
> User is able to activate service and log in.  Phone reboots with new
> configuration.  However, primary line does not show up on button one,
> speed dial shows up on button 2.  Phone gets no dial tone and is unable
> to complete calls.
>
> This same question was asked by Vineet Sanghi on July 14, but if it was
> solved, the solution was not posted.
>
> Relevant portions of config
>
> Voice logout-profile 1
>        Number 3002 type normal
>
> Voice user-profile 1
>        Max-idle-time 5
>        Pin 1234
>        User br2ph3 password cisco
>        Number 3102 type normal
>        Speed-dial 1 3006 label "3006"
>
> Telephony-service
>        Em logout 19:0 23:0 7:0
>        url authentication http://10.10.202.1/CCMCIP/authenticate.asp
> br2ph3 cisco
>
> ephone 2
>        mac-address x.x.x
>        type 7961
>        logout-profile 1
>
> I have executed a restart all inside of telephony-service.
>
> Jeff
>
> -----------------------------------------------------------
> Jeffrey T. Girard ("Jeff")
> COL, 53
> Future Forces Integration Directorate (FFID), Deputy - Networks
> office:  (915)568-1240  DSN 978
> Mobile:  (915)727-4222
> reply to:  [email protected]
>
>
> Classification: UNCLASSIFIED
> Caveats: FOUO
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>



-- 
Regards,

Otto Sanchez
CCIE #25592 (Voice)
Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to