Thanks Angel. Alas, trunk definitely in its own region (BR2, 729). I'd had to 
uncheck the wait for h.245 to make the egress calling work (from UCM) and right 
now all locations (UCM) have unlimited bandwidth. I did not explicitly do 
anything to inter or intra zone bandwidth on the gk so that should have been 
fine.

 

Paul

 

=======================================================================

 

              Paul Dardinski - CCIE #16842 (RS & Security)

                     CCVP, CCNP, CCDA, MCSE, MBA

                      Cisco Wireless Specialist

                       Marshall Communications

                        20098 Ashbrook Place

                              Suite 260

                         Ashburn, VA 20147

                     (571) 223-2010 (Ext 105)

                        FAX: (571) 223-2012

 

=======================================================================

 

From: Angel Perez [mailto:gorr...@hotmail.com] 
Sent: Thursday, February 11, 2010 3:31 AM
To: Paul Dardinski; osl osl
Cc: earl.ho...@sarcom.com
Subject: RE: [OSL | CCIE_Voice] 1719 issue....

 

Hello:
 

Check the following
 
- The gk trunk most be in region that speaks g729 with hq region
- Unchek "wait for h245 capabilities" check box at gk trunk
- Also be sure that the calls is g729 and gk cac has enough bandwith (erase 
bandwith commands from gk config to be sure)
 
hth
 

________________________________

Date: Wed, 10 Feb 2010 19:53:02 -0500
From: pa...@marshallcomm.com
To: ccie_voice@onlinestudylist.com
CC: earl.ho...@sarcom.com
Subject: [OSL | CCIE_Voice] 1719 issue....

I'm looking for some help re: via gk intrazone UCM-CME 

 

Basically with the below I'm able to egress call from UCM via GK to remote BR2. 
However, ingress calls via BR2-to-UCM are failing. Configuration of course 
works if I don't use viazone, but enabling the via seems to be causing issue 
with UCM. Below see my pertinent configs. UCM has a translation inbound 
dropping the prefix 7. Note that I'm currently running 729 on both legs and UCM 
has cac set to 729 to BR2. Config works if running straight non-via (remove the 
invia/outvia). Ignore the static statement as I have tried with and without it, 
but leaving it in for the moment unless someone can advise? Any tips here would 
be GREATLY appreciated!

 

Thanks in advance,

Paul

 

GK CONFIG (applicable config):

HQ_Rtr:

 

voice service voip 

 allow-connections h323 to h323

 

interface Loopback0

 ip address 10.10.32.1 255.255.255.255

 ip ospf network point-to-point

 h323-gateway voip interface

 h323-gateway voip id VIA ipaddr 10.10.32.1 1719

 h323-gateway voip h323-id HQ_Rtr

 h323-gateway voip bind srcaddr 10.10.32.1

 

gatekeeper

 zone local CM ccbootcamp.com 10.10.32.1 invia VIA outvia VIA enable-intrazone

 zone local VIA ccbootcamp.com

 alias static 10.1.200.21 34491 gkid CM gateway voip ras 10.1.200.21 32880 e164 
2002 e164 2001 e164 1002 e164 1001

 gw-type-prefix 1#* default-technology

 no shutdown

 

dial-peer voice 2001 voip

 destination-pattern 7....

 session target ras

dial-peer voice 2002 voip

 destination-pattern 3...

 session target ras

 

HQ_Rtr(config-gk)#do sh gatek end

                    GATEKEEPER ENDPOINT REGISTRATION

                    ================================

CallSignalAddr  Port  RASSignalAddr   Port  Zone Name         Type    Flags 

--------------- ----- --------------- ----- ---------         ----    ----- 

10.10.32.1      1720  10.10.32.1      62047 VIA               H323-GW 

    H323-ID: HQ_Rtr

    Voice Capacity Max.=  Avail.=  Current.= 0

10.10.32.3      1720  10.10.32.3      51829 CM                H323-GW 

    H323-ID: CME

    E164-ID: 3003

    E164-ID: 3001

    E164-ID: 442076303001

    E164-ID: 3002

    E164-ID: 3019

    E164-ID: 3020

    E164-ID: 3017

    E164-ID: 3018

    E164-ID: 3111

    E164-ID: 3021

    Voice Capacity Max.=  Avail.=  Current.= 0

10.1.200.20     49699 10.1.200.20     36939 CM                VOIP-GW 

    H323-ID: GK_Trunk_1

    Voice Capacity Max.=  Avail.=  Current.= 0

10.1.200.21     34491 10.1.200.21     32880 CM                VOIP-GW D S

    H323-ID: GK_Trunk_2

    E164-ID: 2002 (static)

    E164-ID: 2001 (static)

    E164-ID: 1002 (static)

    E164-ID: 1001 (static)

    Voice Capacity Max.=  Avail.=  Current.= 0

Total number of active registrations = 5

 

HQ_Rtr#sh gatek gw-type-prefix 

GATEWAY TYPE PREFIX TABLE

=========================

Prefix: 1#*    (Default gateway-technology)

  Zone CM master gateway list:

    10.10.32.3:1720 CME 

    10.1.200.20:49699 GK_Trunk_1 

    10.1.200.21:34491 GK_Trunk_2

 

BR2: (confirmed that 2003 is egress peer via deb voi dialp inout)

dial-peer voice 2003 voip

 description to gk

 destination-pattern 7[12]...

 session target ras

dial-peer voice 2004 voip

 description incoming voip default

 destination-pattern 3...

 session target ras

 

 

 

 

 

=======================================================================

 

              Paul Dardinski - CCIE #16842 (RS & Security)

                     CCVP, CCNP, CCDA, MCSE, MBA

                      Cisco Wireless Specialist

                       Marshall Communications

                        20098 Ashbrook Place

                              Suite 260

                         Ashburn, VA 20147

                     (571) 223-2010 (Ext 105)

                        FAX: (571) 223-2012

 

=======================================================================

 

 

________________________________

¡Nuevo MSN Entretenimiento! Todos los trailers, series de tv y videoclips, los 
mejores juegos online y lo último sobre tus estrellas favoritas. 
<http://entretenimiento.es.msn.com/> 

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to