Hi:
Use debug voip dialpeer all at br2 and hq, just to verify that the call is
hiting the correct outgoing/incomind dial peers, this way you may isolate the
problem in hq or br2 router.
Also try with deb h225 asn1 and try to find admission reject message.
Sometimes this command is also necesary:
Subject: RE: [OSL | CCIE_Voice] 1719 issue....
Date: Thu, 11 Feb 2010 07:22:27 -0500
From: pa...@marshallcomm.com
To: gorr...@hotmail.com; ccie_voice@onlinestudylist.com
CC: earl.ho...@sarcom.com
Thanks Angel. Alas, trunk definitely in its own region (BR2, 729). I’d had to
uncheck the wait for h.245 to make the egress calling work (from UCM) and right
now all locations (UCM) have unlimited bandwidth. I did not explicitly do
anything to inter or intra zone bandwidth on the gk so that should have been
fine.
Paul
=======================================================================
Paul Dardinski - CCIE #16842 (RS & Security)
CCVP, CCNP, CCDA, MCSE, MBA
Cisco Wireless Specialist
Marshall Communications
20098 Ashbrook Place
Suite 260
Ashburn, VA 20147
(571) 223-2010 (Ext 105)
FAX: (571) 223-2012
=======================================================================
From: Angel Perez [mailto:gorr...@hotmail.com]
Sent: Thursday, February 11, 2010 3:31 AM
To: Paul Dardinski; osl osl
Cc: earl.ho...@sarcom.com
Subject: RE: [OSL | CCIE_Voice] 1719 issue....
Hello:
Check the following
- The gk trunk most be in region that speaks g729 with hq region
- Unchek "wait for h245 capabilities" check box at gk trunk
- Also be sure that the calls is g729 and gk cac has enough bandwith (erase
bandwith commands from gk config to be sure)
hth
Date: Wed, 10 Feb 2010 19:53:02 -0500
From: pa...@marshallcomm.com
To: ccie_voice@onlinestudylist.com
CC: earl.ho...@sarcom.com
Subject: [OSL | CCIE_Voice] 1719 issue....
I’m looking for some help re: via gk intrazone UCM-CME
Basically with the below I’m able to egress call from UCM via GK to remote BR2.
However, ingress calls via BR2-to-UCM are failing. Configuration of course
works if I don’t use viazone, but enabling the via seems to be causing issue
with UCM. Below see my pertinent configs. UCM has a translation inbound
dropping the prefix 7. Note that I’m currently running 729 on both legs and UCM
has cac set to 729 to BR2. Config works if running straight non-via (remove the
invia/outvia). Ignore the static statement as I have tried with and without it,
but leaving it in for the moment unless someone can advise? Any tips here would
be GREATLY appreciated!
Thanks in advance,
Paul
GK CONFIG (applicable config):
HQ_Rtr:
voice service voip
allow-connections h323 to h323
interface Loopback0
ip address 10.10.32.1 255.255.255.255
ip ospf network point-to-point
h323-gateway voip interface
h323-gateway voip id VIA ipaddr 10.10.32.1 1719
h323-gateway voip h323-id HQ_Rtr
h323-gateway voip bind srcaddr 10.10.32.1
gatekeeper
zone local CM ccbootcamp.com 10.10.32.1 invia VIA outvia VIA enable-intrazone
zone local VIA ccbootcamp.com
alias static 10.1.200.21 34491 gkid CM gateway voip ras 10.1.200.21 32880 e164
2002 e164 2001 e164 1002 e164 1001
gw-type-prefix 1#* default-technology
no shutdown
dial-peer voice 2001 voip
destination-pattern 7....
session target ras
dial-peer voice 2002 voip
destination-pattern 3...
session target ras
HQ_Rtr(config-gk)#do sh gatek end
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type Flags
--------------- ----- --------------- ----- --------- ---- -----
10.10.32.1 1720 10.10.32.1 62047 VIA H323-GW
H323-ID: HQ_Rtr
Voice Capacity Max.= Avail.= Current.= 0
10.10.32.3 1720 10.10.32.3 51829 CM H323-GW
H323-ID: CME
E164-ID: 3003
E164-ID: 3001
E164-ID: 442076303001
E164-ID: 3002
E164-ID: 3019
E164-ID: 3020
E164-ID: 3017
E164-ID: 3018
E164-ID: 3111
E164-ID: 3021
Voice Capacity Max.= Avail.= Current.= 0
10.1.200.20 49699 10.1.200.20 36939 CM VOIP-GW
H323-ID: GK_Trunk_1
Voice Capacity Max.= Avail.= Current.= 0
10.1.200.21 34491 10.1.200.21 32880 CM VOIP-GW D S
H323-ID: GK_Trunk_2
E164-ID: 2002 (static)
E164-ID: 2001 (static)
E164-ID: 1002 (static)
E164-ID: 1001 (static)
Voice Capacity Max.= Avail.= Current.= 0
Total number of active registrations = 5
HQ_Rtr#sh gatek gw-type-prefix
GATEWAY TYPE PREFIX TABLE
=========================
Prefix: 1#* (Default gateway-technology)
Zone CM master gateway list:
10.10.32.3:1720 CME
10.1.200.20:49699 GK_Trunk_1
10.1.200.21:34491 GK_Trunk_2
BR2: (confirmed that 2003 is egress peer via deb voi dialp inout)
dial-peer voice 2003 voip
description to gk
destination-pattern 7[12]...
session target ras
dial-peer voice 2004 voip
description incoming voip default
destination-pattern 3...
session target ras
=======================================================================
Paul Dardinski - CCIE #16842 (RS & Security)
CCVP, CCNP, CCDA, MCSE, MBA
Cisco Wireless Specialist
Marshall Communications
20098 Ashbrook Place
Suite 260
Ashburn, VA 20147
(571) 223-2010 (Ext 105)
FAX: (571) 223-2012
=======================================================================
¡Nuevo MSN Entretenimiento! Todos los trailers, series de tv y videoclips, los
mejores juegos online y lo último sobre tus estrellas favoritas.
_________________________________________________________________
¿Aún no sabes qué móvil eres? ¡Descúbrelo aquí!
http://www.quemovileres.com/
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com