gw-priority 0 says "never use this gateway for this prefix". Essentially they are put there for completeness to ensure that BR2RTR is never used for the HQ and BR1 routes.
On Tue, Feb 23, 2010 at 6:00 AM, <iy...@nationwide.com> wrote: > > I am a little confused with the solution for question 4.6 specifically the > Zone prefix commands.. The solution has the following zone prefix commands > on the HQ RTR in addition to others > > HQRTR(config-gk)#zone prefix PL 5... gw-priority 10 gk-trunk2 > ;;;;;;; > ;;;;;; > ;;;;;; > ;;;; > > HQRTR (config-gk)#zone prefix PL 5... gw-priority 0 BR2-RTR > HQRTR (config-gk)#zone prefix PL 1... gw-priority 0 BR2-RTR > > What I don't understand is that the 5XXX and 1XXX are DNs in the HQ and BR1 > locations and are to be routed to the CallManager(using the other zone > prefix commands, so why do we need these zone prefix commands? > > Thanks > Kalyan > > > > > > > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
