Hi Wael, I am not sure if you can actually get CME fully running with phones in DynaMIPS, but you can have external devices communicate with the virtual router. Are you using GNS3? It is a GUI frontend for DynaMIPS. In the list of network devices you should have a 'cloud' object. In the properties for the cloud object you can select your PCs physical NIC. Then connect the cloud to your virtual router. Connect your PCs NIC to a switch with the phones and they shouldbe able to talk to CME.
Like I said, not sure if they'll actually register, but I use this method to test remote access VPN configs, call-home over Internet, etc. Use a second NIC if you don't want your PC on the same subnet. Or, if your NIC supports vlan tagging just create a different sub-if. HTH, Jason Sent while mobile. On Mar 9, 2010, at 3:15, "Wael Agina" <[email protected]> wrote: > Dear All, > > I have dynamips installed on my PC and I can console to the routers. > Now i can issue all the CUCME config normally. > > However I need to register CIPC / Softphone to specific router > instance on dynamips. > > I can telnet to specific router using the port assigned to it, but > how to let softphone access it using an IP ? > > I hope someone has tried this and have an answer. > > Regards, > Wael Agina > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com http://slash128.com _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
