Hi Wael

This might help:
http://corner-il.blogspot.com/2007/05/ccie-voice-home-lab-with-dynamipsvmware.html

Regards
Patrick

2010/3/9 Jason Granat <[email protected]>

> Hi Wael,
>
> I am not sure if you can actually get CME fully running with phones in
> DynaMIPS, but you can have external devices communicate with the
> virtual router. Are you using GNS3? It is a GUI frontend for DynaMIPS.
> In the list of network devices you should have a 'cloud' object. In
> the properties for the cloud object you can select your PCs physical
> NIC. Then connect the cloud to your virtual router. Connect your PCs
> NIC to a switch with the phones and they shouldbe able to talk to CME.
>
> Like I said, not sure if they'll actually register, but I use this
> method to test remote access VPN configs, call-home over Internet,
> etc. Use a second NIC if you don't want your PC on the same subnet.
> Or, if your NIC supports vlan tagging just create a different sub-if.
>
> HTH,
>
> Jason
>
> Sent while mobile.
>
> On Mar 9, 2010, at 3:15, "Wael Agina" <[email protected]> wrote:
>
> > Dear All,
> >
> >   I have dynamips installed on my PC and I can console to the routers.
> > Now i can issue all the CUCME config normally.
> >
> > However I need to register CIPC / Softphone to specific router
> > instance on dynamips.
> >
> > I can telnet to specific router using the port assigned to it, but
> > how to let softphone access it using an IP ?
> >
> > I hope someone has tried this and have an answer.
> >
> > Regards,
> > Wael Agina
> > _______________________________________________
> > For more information regarding industry leading CCIE Lab training,
> > please visit www.ipexpert.com
>
>
>
> http://slash128.com
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to